(Ref. Fig. 601/TASK 52-10-00-991-028) R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
(Ref. Fig. 601A/TASK 52-10-00-991-028-A)
**ON A/C ALL
(1) Make sure that the door locking mechanism and the release mechanism of the emergency escape slide are correctly adjusted.
(a) Put the door in the up position. 1 Make sure that you can correctly install:
_
-
the RIGGING PIN (98DNSA20206120) in the door-high locking bellcrank (6),
-
the RIGGING PIN (98DNSA20206120) in the torsion bar bellcrank (4),
-
the PIN - RIGGING (98D52103006000) in the reducer shaft bellcrank (5).
2 If you cannot install the RIGGING PIN, adjust the mechanism
_ (Ref. TASK 52-11-21-400-001).
3 Remove the rigging pins.
_
(b) Put the door in the down position. 1 Make sure that you can correctly install:
_
-the PIN - RIGGING (98D52103006000) in the reducer shaft bellcrank (5),
1EFF : ALL 1 52-10-00Page 605 1 1 Aug 01/05 1 1 1CES 1
Check of the Adjustment of the Passenger/Crew Door Mechanisms
Figure 601/TASK 52-10-00-991-028
R 1EFF : 001-002, 1 52-10-00Page 606 1 1 May 01/04 1 1 1CES 1
Check of the Adjustment of the Passenger/Crew Door Mechanisms Figure 601A/TASK 52-10-00-991-028-A
R 1EFF : 003-049, 051-099, 101-149, 151-199, 1 52-10-00Page 607 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
-
the RIGGING PIN (98DNSA20206120) in the triple flexible-control bellcrank (3) (armed handle of the escape slide),
-
the PIN - RIGGING (98D52103006000) in the triple bellcrank on the locking shaft (1),
-
the RIGGING PIN (98DNSA20206120) in the emergency control handle (2) in the ARMED position.
2 If you cannot install the RIGGING PIN, adjust the mechanism
_ (Ref. TASK 52-11-21-400-001).
3 Remove the rigging pins.
_
**ON A/C 001-002,
Subtask 52-10-00-220-077
C. Check of the Adjustment of the Girt Bar
(1)
With the door in the closed position, put the emergency control handle in the ARMED position.
(2)
Make sure that the visual indicator of the girt bar comes into view.
(3) Put the emergency control handle in the DISARMED position. R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 52-10-00-220-077-A
C. Check of the Adjustment of the Girt Bar
(Ref. Fig. 602/TASK 52-10-00-991-045)
(1)
With the door in the closed position, put the emergency control handle in the ARMED position.
(2)
Make sure that the visual indicator of the girt bar comes into view.
(3)
Make sure that the ends of the girt bar move crosswise.
(4)
Put the emergency control handle in the DISARMED position.
(5)
Push the trigger (4) aft then pull aft to decrease the length of the telescopic end (3). Let the telescopic end extend again.
1EFF : ALL 1 52-10-00Page 608 1 1 Aug 01/05 1 1 1CES 1
Emergency Escape Slide/Raft Girt Bar
Figure 602/TASK 52-10-00-991-045
R 1EFF : 003-049, 051-099, 101-149, 151-199, 1 52-10-00Page 609 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
(6)
Make sure that the telescopic end (3) of the girt bar (2) moves freely with no hard points.
(7)
Make sure that the trigger (4) goes back to its locked position. To do this, make sure that you cannot decrease the length of the telescopic end (3) of the girt bar (2).
**ON A/C ALL
5. Close-up
________
**ON A/C 001-002,
Subtask 52-10-00-410-089
A. Installation of the Components
(1)
Remove the BALLAST WEIGHT - PASSENGER CREW DOOR (98D52103501000) (Ref. TASK 52-10-00-080-001).
(2)
Install the door insulation.
(3)
Install the door linings:
R (a) For the FWD passenger/crew doors (Ref. TASK 25-23-46-400-001):
-
For the left door: 831AZ, 831BZ, 831CZ, 831DZ, 831EZ, 831FZ and 831GZ.
-
For the right door: 841AZ, 841BZ, 841CZ, 841DZ, 841EZ, 841FZ and 841GZ.
(b) For the AFT passenger/crew doors (Ref. TASK 25-23-46-400-002):
-
For the left door: 832AZ, 832BZ, 832CZ, 832DZ, 832EZ, 832FZ and 832GZ.
-
For the right door: 842AZ, 842BZ, 842CZ, 842DZ, 842EZ, 842FZ and 842GZ.
(4) Install the escape slide (Ref. TASK 25-62-44-400-001).
1EFF : ALL 1 52-10-00Page 610 1 1 May 01/05 1 1 1CES 1R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門1(101)
