1EFF : ALL 1 32-33-00Page 507 1 1 Feb 01/05 1 1 1CES 1
-------------------------------------------------------------------------------ACTION RESULT
-------------------------------------------------------------------------------end of the downlock link movement.
On the panel 402VU:
-the three green triangles on the L/G annunciator panel come into view.
On the ECAM lower DU, after thirty seconds:
-six green triangles come into view
-the three door symbols will show doors open (white) or doors in transit (amber).
On the ECAM upper DU, after thirty seconds these captions will come into view: L/G DOOR NOT CLOSED MAX SPEED 250.
Subtask 32-33-00-860-064
B. Aircraft Maintenance Configuration
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE LANDING GEAR DOORS ARE
_______
CLEAR.
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE LANDING GEAR ARE CLEAR.
_______
R (1) Install the GROUND SAFETY LOCK (D23080000) on the NLG and the GROUND LOCK SLEEVE (460005833) or the GROUNDLOCK SLEEVE (460007280) on each MLG lockstay actuator (Ref. TASK 32-00-00-481-001) .
(2) Visually examine the L/G to make sure that it is down and locked.
NOTE : The L/G doors do not close after Free-Fall operation.
____
R (3) Remove the GROUND SAFETY LOCK from the NLG and the GROUND LOCK SLEEVE from each MLG.
WARNING : WHEN THE GRAVITY GEAR HANDLE IS OPERATED THE L/G DOORS WILL
_______
CLOSE.
1EFF : ALL 1 32-33-00Page 508 1 1 Aug 01/05 1 1 1CES 1
(4)
On the panel 400VU, move the landing-gear control-lever 6GA to the DOWN position (to reset the hydraulic system).
(5)
On the panel 110VU, turn the GRAVITY GEAR EXTN handle counterclockwise three full turns at a rate of one full turn each 5 seconds (L/G doors close). Fold the GRAVITY GEAR EXTN handle into the center console.
(6)
Visually examine the L/G doors to make sure that they are closed and locked.
(7)
On the panel 400VU, move the landing-gear control-lever 6GA to the UP position (doors open, L/G retracts and doors close).
(8)
Visually examine the L/G and the L/G doors to make sure that they are fully retracted and locked.
(9)
Make sure that the ECAM lower DU shows that:
-
the L/G is retracted and locked
-
the L/G doors are closed and locked. Make sure that the three green triangles on the L/G annunciator panel 402VU are off.
Subtask 32-33-00-720-060
C. Functional Check of the L/G Safety Valve Power Interrupt Circuit
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE LANDING GEAR DOORS ARE
_______
CLEAR.
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE LANDING GEAR ARE CLEAR.
_______
NOTE : If you did the Free-Fall Extension Check as the MPD task do this
____
test.
(1)
Make sure that ADIRS 1 or 3 are powered (Ref. TASK 34-10-00-860-002), (Ref. TASK 34-10-00-860-005).
(2)
On the panel 400VU, move the landing-gear control-lever 6GA to the DOWN position.
(3) Install the GROUND LOCK SLEEVE (460005833) or the GROUNDLOCK SLEEVE R (460007280) on each MLG lockstay actuator and the GROUND SAFETY LOCK R (D23080000) on the NLG (Ref. TASK 32-00-00-481-001).
(4) Visually examine the L/G to make sure that it is down and locked.
1EFF : ALL 1 32-33-00Page 509 1 1 Aug 01/05 1 1 1CES 1R (5) Remove the GROUND LOCK SLEEVE from each MLG and the GROUND SAFETY R LOCK from the NLG.
(6)
On the panel 400VU, move the landing-gear control-lever 6GA to the UP position. While the L/G retracts open the circuit breaker 1GA and make sure that the L/G continues to retract. Close the circuit breaker 1GA.
(7)
Visually examine the L/G and the L/G doors to make sure that they are retracted and locked.
5. Close-up
________
(Ref. Fig. 501/TASK 32-33-00-991-001)
Subtask 32-33-00-864-050
A. Depressurize the Hydraulic Systems WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE LANDING GEAR DOORS ARE
_______
CLEAR.
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE LANDING GEAR ARE CLEAR.
_______
(1)
On the panel 400VU, move the landing-gear control-lever 6GA to the DOWN position.
(2)
Depressurize the Green hydraulic system
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架5(98)
