(12)
 Connect the isolation coupling of the PTU (Ref. TASK 29-23-00-860-002).

 (13)
 Make sure that the lower ECAM DU shows:

 -
the landing gear is down and locked

 -
the landing gear doors are closed and locked.

 (14)
 Make sure that on panel 402VU, the three green position-indicator-lights are on.

R 1EFF : ALL 1 32-33-00Page 584 1 1 Aug 01/05 1 1 1CES 1 Subtask 32-33-00-720-062

 C. Test
 (1) Do a functional test of the L/G Normal Extension and Retraction system (Ref. TASK 32-31-00-720-002).
 Subtask 32-33-00-860-057
 D. Aircraft Maintenance Configuration
R  (1) Make sure that the GROUND SAFETY LOCK is installed on the NLG (Ref. TASK 32-00-00-481-001).
 (2)
 Make sure that the GROUND LOCK SLEEVE (460005833) or the GROUNDLOCK SLEEVE (460007280) is installed on each MLG lockstay actuator.

 (3)
 Disconnect the hydraulic ground power-supply from the GREEN ground-service panel on panel 197CB.

 (4)
 De-energize the aircraft electrical circuits
 (Ref. TASK 24-41-00-862-002).

 Subtask 32-33-00-586-052
 E. Lower the Aircraft
 (1) Lower the aircraft off jacks (Ref. TASK 07-11-00-586-002).
 Subtask 32-33-00-869-084

 F. Aircraft Maintenance Configuration
 (1) Put the aircraft back to the ground configuration (Ref. TASK 32-00-00-860-002).
 Subtask 32-33-00-942-065
 G. Removal of Equipment
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the safety barriers.

 (3)
 Remove the warning notice(s).

 1EFF : ALL 1 32-33-00Page 585 1 1 Aug 01/05 1 1 1CES 1

 (4) Remove the ground support and maintenance equipment, the special and

 standard tools and all other items.

 1EFF : ALL 1 32-33-00Page 586 1 1 Aug 01/05R 1 1 1CES 1

 TASK 32-33-00-710-001
 Operational Check of Gear Uplock and Door Uplock Mechanical Control
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 323300-05
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers No specific warning notice No specific access platform 3 m (9 ft. 10 in.) 98A32301000000 3 RIGGING PIN 98DNSA20208040 1 RIGGING PIN 98DNSA20208060 5 RIGGING PIN
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
 Configuration before Maintenance Action 29-10-00-863-001 Pressurize the Green Hydraulic System 31-60-00-860-001 EIS Start Procedure
 1EFF : ALL 1 32-33-00Page 587 1 1 Aug 01/05R 1 1 1CES 1

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
31-60-00-860-002 EIS Stop Procedure 32-00-00-481-001 Installation of the Safety Devices on the Landing
 Gears 32-12-00-010-001 Open the Main Gear Doors for Access 32-12-00-410-001 Close the Main Gear Doors after Access 32-22-00-010-001 Nose Gear Doors - Ground Doors Opening 32-22-00-410-001 Nose Gear Doors - Ground Doors Closing 32-33-00-820-002 Adjustment of the NLG Free-Fall Extension Mechanical
 System (for corrective action) 32-33-00-820-004 Adjustment of the MLG Free-Fall Extension Mechanical
 System (for corrective action) 32-33-00-991-011 Fig. 502 32-33-00-991-013 Fig. 505
 3. Job Set-up
__________
 Subtask 32-33-00-941-058
 A. Safety Precautions
 (1)
 Put the safety barriers in position.
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM LANDING GEAR 起落架5(119)