(3)
 Close the MLG doors (Ref. TASK 32-12-00-410-001).

 5. Close-up
________ Subtask 32-31-73-942-057
 A. Removal of Equipment
 (1)
 Remove the safety barriers.

 (2)
 Remove the warning notice(s).

 (3)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 32-31-73Page 519 1 1 Aug 01/05R 1 1 1CES 1

 TASK 32-31-73-820-002
 Adjustment of the MLG Extension Proximity Sensors 20GA, 21GA, 22GA, 23GA
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job__________________
 To set the clearances of the MLG extension proximity sensors to the correct
 dimensions.
 2. Job Set-up Information______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific blanking caps No specific circuit breaker(s) safety clip(s) No specific jack (screw) 522 mm (21 in.) No specific safety barriers No specific warning notice No specific 28V D.C. supply No specific access platform 2 m (6 ft. 7 in.) No specific Torque Wrench : range 0.00 to 1.20 m.daN
 (0.00 to 9.00 lbf.ft) 460005842 1 LAMP BOX
 1EFF : ALL 1 32-31-73Page 520 1 1 Aug 01/05R 1 1 1CES 1

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-047 C Z-11.904
 ANTI COR. COMPOUND(HIGH TEMP.SILICONE SEALANT)
 (Ref. 20-31-00) Material No. 09-016 USA MIL-PRF-81733D TYPE II CLASS B
 CORROSION INHIBITING FILLET CONSISTENCY
 (Ref. 20-31-00)
 C. Expendable Parts
 -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
2 spacer 32-11-11 83 -150 2 spacer 32-11-11 83C-150 2 spacer 32-11-11 83D-150 5 spacer 32-11-11 83 -150 5 spacer 32-11-11 83C-150 5 spacer 32-11-11 83D-150 7 spacer 32-11-11 22B-390 12 spacer 32-11-11 22B-430 16 spacer 32-11-11 53 -028 16 spacer 32-11-11 53C-050 16 spacer 32-11-11 53D-050
 D. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
07-11-00-581-001 Lifting for Aircraft Maintenance Operations 07-11-00-582-002 Jacking - General 12-14-32-614-003 Check Charge Pressure of Main Landing Gear Shock
 Absorber 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
 from the External Power 29-10-00-864-001 Depressurize the Green Hydraulic System 32-00-00-481-001 Installation of the Safety Devices on the Landing
 Gears
 1EFF : ALL 1 32-31-73Page 521 1 1 Aug 01/05R 1 1 1CES 1

 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
32-00-00-860-001 Flight Configuration Precautions with Electrical Power 32-00-00-860-002 Ground Configuration after Flight Configuration with
 Electrical Power
 32-12-00-010-001 Open the Main Gear Doors for Access
 32-12-00-410-001 Close the Main Gear Doors after Access
 32-69-00-740-001 BITE Check Landing Gear Control Interface Unit

 (LGCIU) using MCDU to Ensure that Continuous BITE is Operative
 **ON A/C 001-003, 051-052,
 32-31-73-991-017-A Fig. 505
R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 32-31-73-991-017-B Fig. 505A
 **ON A/C 001-003, 051-052,
 32-31-73-991-032-A Fig. 506
R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 32-31-73-991-032-B Fig. 506A
 **ON A/C ALL
 3. Job Set-up
__________
 Subtask 32-31-73-941-059
 A. Safety Precautions
 (1)
 Put the safety barriers in position.
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架5(60)