1EFF : ALL 1 32-31-73Page 573 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
Subtask 32-31-73-860-064
P. Aircraft Maintenance Configuration
(1)
If you did the flight configuration precautions, put the aircraft back to the ground configuration (Ref. TASK 32-00-00-860-002).
(2)
Connect the isolation coupling of the PTU (Ref. TASK 29-23-00-860-002).
(3)
Pressurize the applicable hydraulic reservoirs (Ref. TASK 29-14-00-614-002).
5. Close-up
________ Subtask 32-31-73-410-065
A. Close Access
(1) Remove the SAFETY PIN - NLG DOOR from each of the NLG doors.
(2) Close the NLG doors (Ref. TASK 32-22-00-410-001). Subtask 32-31-73-942-061
B. Removal of Equipment
(1)
Remove the safety barriers.
(2)
Remove the warning notice(s).
(3)
Remove the access platform(s).
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 32-31-73Page 574 1 1 Aug 01/05R 1 1 1CES 1
TASK 32-31-73-820-006
Adjustment of the NLG Extension/Steering Proximity Sensors 24GA, 25GA
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
To set the clearances of the NLG extension proximity sensors to the correct dimensions.
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps
No specific circuit breaker(s) safety clip(s)
No specific non-metallic scraper
No specific non-metallic wedge
No specific safety barriers
R No specific Torque Wrench : range 0.00 to 1.20 m.daN
R (0.00 to 9.00 lbf.ft) M46214 1 ADJUSTMENT TOOL 98D32203502000 3 SAFETY PIN - NLG DOOR
1EFF : ALL 1 32-31-73Page 575 1 1 May 01/05 1 1 1CES 1 B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-111 Material No. 05-112 Material No. 08-001
Material No. 09-001 Material No. 09-008E Material No. 11-026 Material No. 19-003
C. Expendable Parts
NITRIC ACID (Ref. 20-31-00)
C Z-23.546
SODIUM DICHROMATE (Ref. 20-31-00)
USA DOD-A-82720
GENERAL PURPOSE ADHESIVE HONEYCOMB FILLER
(Ref. 20-31-00)
USA MIL-S-8802 TYPE I CLASS A
FUEL TANK SEALANTPOLYSULFIDE (Ref. 20-31-00)
USA AMS 3277
EARLY QUICK REPAIR FUEL TANK SEALANT (Ref. 20-31-00)
GB DEF-STAN 68-148/1
SOLVENT GENERAL PURPOSE (Ref. 20-31-00)
USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
R 35 shim
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM LANDING GEAR 起落架5(75)
