1EFF : ALL 1 31-63-34Page 404 1 1 Feb 01/05 1 1 1CES 1 Subtask 31-63-34-865-051

 B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------FOR 1WT1
 49VU EIS/DMC1/SPLY 10WT1 E11
 49VU EIS/DMC1/SWTG 21WT1 E09
 FOR 1WT2 121VU EIS/DMC2/SPLY 10WT2 Q08 121VU EIS/DMC2/SWTG 21WT2 R08
 FOR 1WT3 49VU EIS/DMC3/SWTG 21WT3 E07 121VU EIS/DMC3/SPLY 10WT3 Q09
 4. Procedure
_________
R (Ref. Fig. 401/TASK 31-63-34-991-001)
 Subtask 31-63-34-420-050
 A. Installation of the DMC
 (1)
 Clean the component interface and/or the adjacent area.

 (2)
 Do an inspection of the component interface and/or the adjacent area.

 (3)
 Remove the blanking caps from the electrical connectors (1).

 (4)
 Make sure that the electrical connectors (1) are in the correct condition.

 (5)
 Install the DMC (5) on its rack (2).

 (6)
 Push the DMC (5) on its rack (2) to connect the electrical connectors (1).

 (7)
 Engage the nuts (3) on the lugs (4) and tighten.

 1EFF : ALL 1 31-63-34Page 405 1 1 Feb 01/03 1 1 1CES 1 Subtask 31-63-34-865-052

 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): FOR 1WT1 10WT1, 21WT1 FOR 1WT2 10WT2, 21WT2 FOR 1WT3 10WT3, 21WT3
 Subtask 31-63-34-710-051
 C. Do the operational test of the Electronic Instrument System (EIS) (Ref. TASK 31-60-00-710-001)

R **ON A/C 401-499,
 Subtask 31-63-34-740-050
 D. Check the P/N update
 (1) Do the procedure to get the SYSTEM REPORT/TEST INST:DISPLAY page (Ref. TASK 31-32-00-860-008)
 NOTE : The actions and results of this procedure occur on the MCDU
____
 you use.

 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
 Push the line key adjacent to the - the DMC1 (2 or 3) menu page comes EIS1 (2 or 3) indication into view

 2.
 Push the line key adjacent to the - the LRU IDENTIFICATION page comes LRU IDENT indication into view.

 Make sure that the DMC - EIS SOFTWARE P/N shown on the LRU IDENTIFICATION page is the same as the computer P/N (given on the front face of the disks located in the disk stowage box). Make sure that the DMC - EIS SOFTWARE P/N shown on the LRU IDENTIFICATION page is the same as the other EIS components SOFTWARE P/N (the PFD CAPT, the ND CAPT, the EWD, the SD, the ND F/O, the PFD F/O, the other DMC's)
 1EFF : ALL 1 31-63-34Page 406 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 31-63-34Page 407 1 1 Feb 01/05 1 1 1CES 1 PRIMARY FLIGHT DISPLAY (PFD) - DESCRIPTION AND OPERATION

R R R R  NOTE : If the SOFTWARE P/N is not the same, you must perform a____ XLOADING procedure (this is the case when another DMC is already loaded), or an uploading procedure (case when no DMC has been already loaded). 
R  Subtask 31-63-34-740-051 
R R R R  E. Perform the Xloading procedure Whenever necessary, that is when the P/N needs to be updated perform the Xloading procedure of the DMC (Ref. TASK 31-60-00-610-003), (Ref. TASK 31-60-00-610-004) or (Ref. TASK 31-60-00-610-005). 
R  **ON A/C ALL
 5. Close-up________
 Subtask 31-63-34-410-050
 A. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
 (2) Close the access door 824. (Ref. TASK 52-41-00-410-002)
 (3) Remove the access platform(s).

________________________________________________________
 1. General
_______
 The Primary Flight Display (PFD) image is presented in front of each pilot
 on the outer display unit. It is transferred on the Navigation Display (ND)
 when the PFD is off or when PFD/ND transfer is requested.
 2. Component Location
__________________

R **ON A/C 106-149, 303-399, 401-499,
 (Ref. Fig. 001)
 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
 (Ref. Fig. 002)
 **ON A/C ALL
 -------------------------------------------------------------------------------FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA | | | | DOOR | REF.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 8(8)