(6)
Mach Number
**ON A/C ALL
R **ON A/C 106-149, 303-399, 401-499,
(Ref. Fig. 056)
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
(Ref. Fig. 057)
1EFF : ALL 1 31-64-00Page A23 1 1 Aug 01/05 1 1 1CES 1
PFD - V1 Display Figure 054
R 1EFF : 1 1 1CES 106-149, 303-399, 401-499, 1 111 31-64-00 Page A24 Aug 01/05
PFD - V1 Display
Figure 055
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 31-64-00Page A25 1201-299, 301-302, 1May 01/05 1 1 1CES 1
PFD - Mach Number Display
Figure 056
R 1EFF : 106-149, 303-399, 401-499, 1 31-64-00Page A26 1 1 Aug 01/05 1 1 1CES 1
INTENTIONALLY BLANK
R 1 1
31-64-00Page A27
1 1 May 01/05 1 1 1CES 1
INTENTIONALLY BLANK
R 1 1
31-64-00Page A28
1 1 May 01/05 1 1 1CES 1
PFD - Mach Number Display
Figure 057
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 31-64-00Page A29 1201-299, 301-302, 1May 01/05 1 1 1CES 1
R **ON A/C ALL
When the mach number is above 0.5 it is displayed just below the speed scale in green color. In case of failure, a red MACH flag is presented.
1EFF : ALL 1 31-64-00Page A30 1 1 Feb 01/05 1 1 1CES 1
(7) Limit Speeds The following flight envelope protection speeds are displayed through the appropriate symbols according to the flight phase and the A/C configuration. They are all computed by the FAC:
-Vsw (Stall Warning Speed),
-Vls (Minimum Selectable Speed)
-Vmax (Vfe or Vle or Vmo)
-Valim
-Vaprot
-Vprot
-Vman (Optimum Manoeuver Speed),
-V3 (Minimum Flap Retraction Speed),
-V4 (Minimum Slat Retraction Speed),
-Vfe next (Vfe corresponding to the next flap handle detent). The corresponding symbols are presented only in analog form, and provided that the corresponding Vc values are within the displayed portion of the Vc scale. Except where specified, the limit speeds are displayed only 10 s after main landing gear is unloading. The FAC manages all the logic conditions for display or non display (NCD) of the relevant symbols.
(a) Vsw
R **ON A/C 106-149, 303-399, 401-499,
(Ref. Fig. 058)
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
(Ref. Fig. 059)
**ON A/C ALL
item (a). The Stall Warning Indication is represented by means of a red and black stripe, the top of which indicates the Vsw value. Vsw = k.Vs is a stall speed which depends on the A/C configuration. Vsw is displayed only 5 s after A/C lift-off and provided that the speed protections (normally given by the flight controls) are lost. In this case, Vsw replaces both Valim and Vaprot indications.
1EFF : ALL 1 31-64-00Page A31 1 1 Aug 01/05 1 1 1CES 1
PFD - Limit Speed Indication Display
Figure 058
R 1EFF : 106-149, 303-399, 401-499, 1 31-64-00Page A32 1 1 Aug 01/05 1 1 1CES 1
INTENTIONALLY BLANK
R 1 1
31-64-00Page A33
1 1 Feb 01/05 1 1 1CES 1
PFD - Limit Speed Indication Display Figure 059 (SHEET 1)
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 31-64-00Page A34 1201-299, 301-302, 1May 01/05 1 1 1CES 1
PFD - Limit Speed Indication Display Figure 059 (SHEET 2)
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 31-64-00Page A35 1201-299, 301-302, 1May 01/05 1 1 1CES 1
(b) Valim
R **ON A/C 106-149, 303-399, 401-499,
(Ref. Fig. 058) **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
**ON A/C ALL (Ref. Fig. 059)
item (b) The top of a red stripe represents absolute speed protection limit given by the flight controls in their normal law.
R (c) Vaprot **ON A/C 106-149, 303-399, 401-499,
**ON A/C ALL (Ref. Fig. 058)
R item (c) The top of a black amber stripe represents the speed protection limit given by the flight controls in their normal law with the side stick controller in the neutral position. (d) Vls **ON A/C 106-149, 303-399, 401-499,
(Ref. Fig. 058) **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
(Ref. Fig. 059)
1EFF : ALL 1 31-64-00Page A36 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 8(25)
