1EFF : ALL 1 31-67-77Page 8 1 1 May 01/05 1 1 1CES 1
ENGINE Page - Display of the Parameters: OIL QUANTITY and FUEL USED
Figure 005
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 Page 931-67-77
1201-299, 301-302, 1 May 01/05
1 1
1CES 1
R **ON A/C 106-149, 303-399, 401-499,
Fuel used indication is given in KG.
The display can vary from 0 to 45,360 KG in 10 KG steps.
**ON A/C ALL
(4) Case 3 The value displayed is replaced by amber XX, when the information is not available from the ECU bus.
D. Fuel Used engine 2 Item 4 The fuel used indication given for the engine 2 follows the display principles as the engine 1
E. Engine vibration N1 R **ON A/C 106-149, 303-399, 401-499,
Item 8
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
Item 5
**ON A/C ALL
The N1 vibration digital value is:
(1)
green in normal operation
(2)
green and pulses if N1 engine vibration exceeds a given threshold. This threshold value is computed by the EIVMU described in chap. 77-30-00 (information transmitted by the SDAC).
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
The display can vary from 0 to 9.9 in 0.1 steps.
1EFF : ALL 1 31-67-77Page 10 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 31-67-77Page 11 1 1 Aug 01/05 1 1 1CES 1
R **ON A/C 106-149, 303-399, 401-499,
The display can vary from 0 to 12.8 in 0.1 steps. **ON A/C ALL
F. Vibration engine 2 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
Item 6 **ON A/C ALL
R The vibration value given for the engine 2 follows the same principles. G. Oil Filter CLOG Indication **ON A/C 106-149, 303-399, 401-499,
Item 6 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
Item 7 **ON A/C ALL
R (1) no display in normal configuration (2) when the pressure drop across the main scavenge oil filter is excessive, an amber CLOG is displayed. H. Fuel Filter CLOG Indication **ON A/C 106-149, 303-399, 401-499,
Item 5
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
Item 8 When the pressure drop across the fuel filter is excessive, an amber CLOG is displayed under the title F.FILTER.
R **ON A/C 106-149, 303-399, 401-499,
When the pressure drop across the fuel filter is excessive, an amber CLOG is displayed under the digital FUEL USED indication.
**ON A/C ALL
J. Starting Sequence Indications Item 9 The indications below come into view during the starting sequence.
(1)
Starter shutoff valve position indication
-
Case 1
Open green: When the valve is fully open
-
Case 2 Closed green: When the valve is fully closed
-
Case 3 XX amber: When the parameter corresponding to a given starter shutoff valve position is not valid at the DMC input.
(2)
Bleed pressure
-
Case 1 Bleed pressure upstream of the precooler is normally green.
-
Case 2 It becomes amber below 21 PSI with actual N2 > 10%
-
Case 3 It is replaced by amber XX when the pressure value is not available as transmitted by the FWC or the SDAC. The display can vary from 0 to 998 PSI in 2 PSI steps.
(3)
Ignition indication
For a given engine, the indication of the selected ignitors A (case
1)
or B (case 2)
1EFF : ALL 1 31-67-77Page 12 1 1 Aug 01/05 1 1 1CES 1
or AB (case 3) is green.
A blank is displayed when no ignitor is selected (case 4).
K. Nacelle Temperature
Item 9
Nacelle temperature indications are:
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
-Case 5 green and pulsing (when above 240.C) or green steady (when below 240.C). (displayed when at least one temperature is above 240.C).
R **ON A/C 106-149, 303-399, 401-499,
*** MOD CFM + EIS2 ***
-Case 5 green and pulsing (when above 240.C) or green steady (when below 240.C).
**ON A/C ALL
The display can vary from -99 .C to +995 .C in 5.C steps.
L. Engine oil Temperature
R **ON A/C 106-149, 303-399, 401-499,
Item 7
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
Item 10
**ON A/C ALL
R **ON A/C 106-149, 303-399, 401-499,
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統(tǒng) 8(138)
