Subtask 27-34-51-220-052-A
 C. Fits and Clearances
 (1) Complete an inspection of these dimensions.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 15.846 | 15.862 | | | 15.816 | | | | OD 3 |(0.6238) |(0.6244) | | |(0.6226) | | | | | | | 0.013 | 0.047 | | | 0.107 | | | | | (0.0005)| (0.0018)| | |(0.0042)| | E | 15.875 | 15.893 | | | | 15.923 | | | ID 4 |(0.6250) |(0.6257) | | | |(0.6268) | | -------------------------------------------------------------------------------
NOTE : No wear is permitted between the bolt (3) and the bush (4).____ 
R  **ON A/C 051-051, 
R  Subtask 27-34-51-220-051 
R  B. Fits and Clearances 
R  (1) Complete an inspection of these dimensions,

R  -------------------------------------------------------------------------------
R  | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | 
R  | DETAIL |---------------------------------------|----------------------------| 
R  | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | 
R  | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | 
R  | NO. |-------------------|-------------------|---------|---------| CLEAR. | 
R  | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| 
R  |--------|---------|---------|---------|---------|---------|---------|--------| 
R  | E | 15.846 | 15.862 | | | 15.831 | | | 
R  | OD 3 |(0.6238) |(0.6244) | | |(0.6232) | | | 
R  | | | | 0.000 | 0.029 | | | 0.059 | 
R  | | | | (0.0000)| (0.0011)| | |(0.0023)| 
R  | E | 15.862 | 15.875 | | | | 15.890 | | 
R  | ID 1 |(0.6244) |(0.6250) | | | |(0.6255) | | 
R  -------------------------------------------------------------------------------
R  NOTE : No wear is permitted between the bush (1) and the bolt (3).____ 
R  Subtask 27-34-51-220-052 
R  C. Fits and Clearances 
R  (1) Complete an inspection of these dimensions. 
R  -------------------------------------------------------------------------------
R  | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | 
R  | DETAIL |---------------------------------------|----------------------------| 
R  | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | 
R  | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | 
R  | NO. |-------------------|-------------------|---------|---------| CLEAR. | 
R  | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| 
R  |--------|---------|---------|---------|---------|---------|---------|--------| 
R  | E | 15.846 | 15.862 | | | 15.831 | | | 
R  | OD 3 |(0.6238) |(0.6244) | | |(0.6232) | | | 
R  | | | | 0.000 | 0.029 | | | 0.059 | 
R  | | | | (0.0000)| (0.0011)| | |(0.0023)| 
R  | E | 15.862 | 15.875 | | | | 15.890 | | 
R  | ID 4 |(0.6244) |(0.6250) | | | |(0.6255) | | 
R  -------------------------------------------------------------------------------
R  NOTE : No wear is permitted between the bolt (3) and the bush (4).____ 

R 1EFF : 051-051, 1 27-34-51Page 605 1 1 May 01/05 1 1 1CES 1R **ON A/C ALL

 Subtask 27-34-51-220-054
 D. Fits and Clearances
 (1) Complete an inspection of these dimensions.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | F | 15.850 | 15.861 | | | 15.821 | | | | OD 5 |(0.6240) |(0.6244) | | |(0.6228) | | | | | | | 0.014 | 0.043 | | | 0.101 | | | | | (0.0005)| (0.0016)| | |(0.0039)| | F | 15.875 | 15.893 | | | | 15.922 | | | ID 6 |(0.6250) |(0.6257) | | | |(0.6268) | | -------------------------------------------------------------------------------
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱3(77)