-
the ELAC 2 indication becomes amber.
-
the indication of the elevators position is in amber crosses.
On the ground, visually make sure that the elevators are in the neutral position.
On the overhead panel 24VU:
-
the OFF legend of the FLT CTL/ELAC 2pushbutton switch goes off.
-
the FAULT legend of the FLT CTL/ELAC 2 pushbutton switch comes on then goes off.
On the lower ECAM display unit, on theF/CTL page:
1EFF : ALL 1 27-34-00Page 510 1 1 May 01/00R 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-push the side stick controller forward until it touches the stop. Hold it in this position.
6. On the overhead panel 24VU:
-release the FLT CTL/ELAC 2 pushbutton switch.
7. On the CAPT (F/O) lateral console:
-move and keep the side stick controller in the neutral position.
8. On the overhead panel 23VU:
-push the FLT CTL/ELAC 1
pushbutton switch.
9. On the maintenance panel 50VU:
-push the HYD LEAK MEASUREMENT VALVES/B pushbutton switch.
-release the HYD LEAK MEASUREMENT VALVES/G and HYD LEAK MEASUREMENT VALVES/Y pushbutton switches.
10. On the lower ECAM display unit, on the F/CTL page:
-make sure that the indexes of the L/ELEV and R/ELEV
-
the indexes of the L/ELEV and R/ELEVindicators move down.
On the overhead panel 24VU:
-
the OFF legend of the FLT CTL/ELAC 2pushbutton switch comes on.
On the lower ECAM display unit, on the F/CTL page:
-
the ELAC 2 indication becomes amber.
-
the indication of the elevators position is in amber crosses.
On the ground, visually make sure that the elevators are in neutral position.
On the overhead panel 23VU:
-
the OFF legend of the FLT CTL/ELAC 1pushbutton switch goes OFF.
-
the FAULT legend of the FLT CTL/ELAC 1 pushbutton switch comes on then goes off.
On the maintenance panel 50VU:
-
the OFF legend of the HYD LEAKMEASUREMENT VALVES/B pushbuttonswitch goes off.
-
the OFF legends of the HYD LEAKMEASUREMENT VALVES/G and HYD LEAKMEASUREMENT VALVES/Y pushbutton switches come on.
1EFF : ALL 1 27-34-00Page 511 1 1 May 01/00R 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
indicators are in the neutral position.
11. On the CAPT (F/O) lateral console:
-pull the side stick controller rearward until it touches the stop. Hold it in this position.
12. On the overhead panel 23VU:
-release the FLT CTL/ELAC 1 pushbutton switch.
13. On the CAPT (F/O) lateral console:
-move and keep the side stick controller in the neutral position.
14. On the overhead panel 23VU:
-push the FLT CTL/ELAC 1 pushbutton switch.
15. On the CAPT (F/O) lateral console:
-push the side stick controller forward until it touches the stop. Hold it in this position.
On the lower ECAM display unit, on theF/CTL page:
-
the indexes of the L/ELEV and R/ELEVindicators move up.
On the overhead panel 23VU:
-
the OFF legend of the FLT CTL/ELAC 1pushbutton switch comes on.
On the lower ECAM display unit, on the F/CTL page:
-
the ELAC 1 indication becomes amber.
-
the indication of the elevators position is in amber crosses.
On the ground, visually make sure that the elevators are in the neutral position.
On the overhead panel 23VU:
-
the OFF legend of the FLT CTL/ELAC 1pushbutton switch goes off.
-
the FAULT legend of the FLT CTL/ELAC 1 pushbutton switch comes on then goes off.
On the lower ECAM display unit, on theF/CTL page:
-
the indexes of the L/ELEV and R/ELEVindicators move down.
1EFF : ALL 1 27-34-00Page 512 1 1 May 01/00R 1 1 1CES 1
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
16. On the overhead panel 23VU: On the overhead panel 23VU:
-release the FLT CTL/ELAC 1 - the OFF legend of the FLT CTL/ELAC 1 pushbutton switch. pushbutton switch comes on.
On the lower ECAM display unit, on the F/CTL page:
-
the ELAC 1 indication becomes amber.
-
the indication of the elevators position is in amber crosses.
On the ground, visually make sure that the elevators are in the neutral position.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱3(22)
