曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

EFFECTIVITY
GUN ALL 27-32-00
Page 503
Feb 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-32-00-740-801
3. Stall Management Yaw Damper (SMYD) BITE Test - Existing Faults
(Figure 502)
A. General
(1) This procedure does the EXISTING FAULTS portion of the Stall Management Yaw Damper
(SMYD) BITE.
(2) Do this BITE test for SMYD 1 and 2 to ensure all faults are found.
(3) For EXISTING FAULTS, the SMYD does internal tests, discrete output checks, sensor interface
checks, and checks of inputs to the SMYD. Any faults that are found during the EXISTING
FAULTS are active. A maintenance message identifies a specific failure which is found by the
SMYD.
B. References
Reference Title
24-22-00-860-813 Supply External Power (P/B 201)
24-22-00-860-814 Remove External Power (P/B 201)
FIM 27-32 TASK 801 Stall Management Yaw Damper BITE Procedure
C. Location Zones
Zone Area
118 Electrical and Electronics Compartment - Right
D. Access Panels
Number Name/Location
117A Electronic Equipment Access Door
E. Procedure
SUBTASK 27-32-00-860-003
(1) Do this task: Supply External Power, TASK 24-22-00-860-813.
SUBTASK 27-32-00-010-001
(2) Open this access panel:
Number Name/Location
117A Electronic Equipment Access Door
SUBTASK 27-32-00-740-001
(3) Do the EXISTING FAULTS test on the SMYD BITE:
(a) Push the ON/OFF switch.
NOTE: The display will show EXISTING FAULTS? If a fault occurs, check to make sure
that all FMC and ADIRU values are good.
(b) Push the YES switch. The display will show:
1) Either a message corresponding the first fault in the list.
2) Or the display will show NO FAULTS.
(c) If there are existing faults, then, do this task: FIM 27-32 TASK 801
(d) If the display shows NO FAULTS, push the MENU switch to return to the EXISTING
FAULTS? display.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-32-00
Page 504
Feb 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
F. If you are finished with the SMYD tests, return the airplane to normal.
SUBTASK 27-32-00-860-004
(1) Push the ON/OFF switch to turn the SMYD display off.
SUBTASK 27-32-00-410-001
(2) Close this access panel:
Number Name/Location
117A Electronic Equipment Access Door
SUBTASK 27-32-00-860-005
(3) If it is not necessary, do this task: Remove External Power, TASK 24-22-00-860-814.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-32-00
Page 505
Feb 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Stall Management Yaw Damper Test
Figure 502 (Sheet 1 of 2)/27-32-00-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-32-00
Page 506
Feb 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Stall Management Yaw Damper Test
Figure 502 (Sheet 2 of 2)/27-32-00-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-32-00
Page 507
Feb 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-32-00-740-802
4. Stall Management Yaw Damper (SMYD) BITE Test - Fault History
(Figure 502)
A. General
(1) This procedure does the FAULT HISTORY? portion of the Stall Management Yaw Damper
(SMYD) BITE.
(2) The SMYD keeps a record of faults in FAULT HISTORY. The faults are grouped by flight leg.
Flight leg 0 (LEG 0) is the most recent flight and includes faults that occurred on the ground after
the most recent flight. Only flight legs with faults will be displayed.
B. References
Reference Title
24-22-00-860-813 Supply External Power (P/B 201)
24-22-00-860-814 Remove External Power (P/B 201)
FIM 27-32 TASK 801 Stall Management Yaw Damper BITE Procedure
C. Location Zones
Zone Area
112 Area Forward of Nose Landing Gear Wheel Well
D. Access Panels
Number Name/Location
117A Electronic Equipment Access Door
E. Prepare for the test
SUBTASK 27-32-00-860-006
(1) Do this task: Supply External Power, TASK 24-22-00-860-813.
SUBTASK 27-32-00-010-002
(2) Open this access panel:
Number Name/Location
117A Electronic Equipment Access Door
F. Procedure
SUBTASK 27-32-00-740-002
(1) Do the FAULT HISTORY test on the SMYD BITE.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊3(99)