曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

334MB Horizontal Stabilizer, Elevator Hinge Cover
334NB Horizontal Stabilizer, Elevator Hinge Cover
343BB Horizontal Stabilizer, Access Panel - T.E. Area
344GB Horizontal Stabilizer, Hinge Cover, Elevator Station 24.09
344HB Horizontal Stabilizer, Elevator Hinge Cover, Elevator Sta 66.54
344JB Horizontal Stabilizer, Elevator Hinge Cover, Elevator Sta 121.59
344KB Horizontal Stabilizer, Elevator Hinge Cover, Elevator Sta 176.64
344LB Horizontal Stabilizer, Elevator Hinge Cover, Elevator Sta 213.32
344MB Horizontal Stabilizer, Elevator Hinge Cover, Elevator Sta 250.04
344NB Horizontal Stabilizer, Elevator Hinge Cover, Elevator Sta 265.45
E. Prepare for the Removal
SUBTASK 27-31-11-860-001
(1) Make sure that pressure is removed from the elevator hydraulic systems A and B. To remove it,
do this task: Remove Pressure from the Elevator Hydraulic Systems A and B,
TASK 27-31-00-800-802.
SUBTASK 27-31-11-010-001
(2) Open this access panel:
Number Name/Location
311BL Stabilizer Trim Access Door
SUBTASK 27-31-11-010-002
(3) Remove this access panel:
Number Name/Location
318BR Tailcone Access Door
to get access to the elevator aft quadrant.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-31-11
Page 402
Oct 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-31-11-010-009
(4) For the left elevator, remove this access panel:
Number Name/Location
333BB Horizontal Stabilizer, Access Panel, Trailing Edge
SUBTASK 27-31-11-010-010
(5) For the right elevator, remove this access panel:
Number Name/Location
343BB Horizontal Stabilizer, Access Panel - T.E. Area
SUBTASK 27-31-11-010-003
(6) For the left elevator, open these access panels:
Number Name/Location
334GB Horizontal Stabilizer, Elevator Hinge Cover
334HB Horizontal Stabilizer, Elevator Hinge Cover
334JB Horizontal Stabilizer, Elevator Hinge Cover
334KB Horizontal Stabilizer, Elevator Hinge Cover
334LB Horizontal Stabilizer, Elevator Hinge Cover
334MB Horizontal Stabilizer, Elevator Hinge Cover
334NB Horizontal Stabilizer, Elevator Hinge Cover
SUBTASK 27-31-11-010-004
(7) For the right elevator, open these access panels:
Number Name/Location
344GB Horizontal Stabilizer, Hinge Cover, Elevator Station
24.09
344HB Horizontal Stabilizer, Elevator Hinge Cover,
Elevator Sta 66.54
344JB Horizontal Stabilizer, Elevator Hinge Cover,
Elevator Sta 121.59
344KB Horizontal Stabilizer, Elevator Hinge Cover,
Elevator Sta 176.64
344LB Horizontal Stabilizer, Elevator Hinge Cover,
Elevator Sta 213.32
344MB Horizontal Stabilizer, Elevator Hinge Cover,
Elevator Sta 250.04
344NB Horizontal Stabilizer, Elevator Hinge Cover,
Elevator Sta 265.45
SUBTASK 27-31-11-860-002
(8) Open this circuit breaker and install safety tag:
CAPT Electrical System Panel, P18-2
Row Col Number Name
C 8 C00544 FLIGHT RECORDER POSITION SENSOR
SUBTASK 27-31-11-860-003
(9) Use the bar, SPL-1677 to set B dimension at 39.89 +/- 0.01 inches (1013.2 +/- 0.3 millimeter)
(Figure 401).
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-31-11
Page 403
Oct 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-31-11-480-001
(10) Install the rig pin E-5 from rig pin kit, SPL-1585 in the elevator aft quadrant (Figure 402).
SUBTASK 27-31-11-820-011
(11) Measure and record the elevator tab position.
NOTE: Measuring and recording the elevator tab position before you remove the tab may
improve the manual reversion success rate if the tab needs to be adjusted after
installation.
(a) If the same tab will be re-installed, then do the following before removing the tab:
1) Make sure that the elevator tab meets the freeplay limits. To check the freeplay limits,
do this task: Elevator Tab Freeplay - Check, TASK 27-31-32-200-801 or Elevator Tab
Freeplay - Check, TASK 27-31-32-200-802.
(b) While you move the elevator trailing edge down, align the projected center of the elevator
trailing edge with the index mark within +/- 0.04 inch (1.0 millimeter), or less.
1) Measure and record the elevator tab position.
F. Elevator Removal
GUN 156, 201-204, 206 PRE SB 737-55A1080; AIRPLANES WITH FOUR ELEVATOR TAB HINGES
SUBTASK 27-31-11-020-009
(1) Remove the elevator connections to the elevator tab control mechanism [34] (Figure 404):
(a) Remove the screws [29] from the pin retainer [30].
(b) Remove the nut [31], washer [32], bushing [33], and pin assembly [21] that attach the tab
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊3(18)