曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

IS IN THE AUTOMATIC POSITION) 
HINGE 
ARM 
SEAR PIN 
SEAR PIN 
3  THE DOOR, IS 0.15 INCH MINIMUM WITH THE BODY ROLLER RETAINER BOLT, WHEN YOU OPEN AND CLOSE MAKE SURE THE CLEARANCE ON THE HEAD OF THE  0.05 INCH MINIMUM  HOUSING 
SKIN.  CUT AND FINISH AS NECESSARY PER  TRIGGER 
OPERATOR STANDARD PROCEDURE TO GET THE 
CORRECT CLEARANCE. 
4  SHRINK SLEEVE NOT NECESSARY 
F-F 
Main Entry Door No. 5 Adjustment 
Figure 501 (Sheet 4) 

A

747-400
MAINTENANCE MANUAL

DOOR 5
HANDLE MECHANISM
LOWER GATE
FWD DOOR 5 (EXAMPLE)
Main Entry Door No. 5 Adjustment
UPPER GATE
DOOR STOP (EXAMPLE)
RULER
F60245
Figure 501 (Sheet 5)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-11-09
 ALL  ú ú 01 Page 508 ú Feb 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

400
20
200
10
PEAK UNLATCHING TORQUE
VS.
HANDLE POSITION

LEGEND:
SHORTEN UPPER GATE PUSHROD AND LENGTHEN SPRING SCALE FORCE AT 18 INCHES RADIUS
UPPER LATCH TORQUE TUBE PUSHROD.
TORQUE MEASURED WITH A TORQUE WRENCH AND ADAPTER.
LENGTHEN UPPER GATE PUSHROD AND UPPER LATCH TORQUE TUBE PUSHROD.
HANDLE POSITION MEASURED MUST NOT INCLUDE
SYSTEM FREEPLAY. REMOVE FREEPLAY PRIOR TO

SHORTEN UPPER GATE PUSHROD.  TAKING MEASUREMENT.
LENGTHEN UPPER GATE PUSHROD.
ADDITIONAL NORMAL ZONE FOR DOORS WITH MAXIMUM PRESSURE SEAL DEFLECTION. ZONE A - NO ADJUSTMENT NECESSARY.

RECOMMENDED TARGET TO AIM FOR IF ANY RIGGING ADJUSTMENT IS MADE (300 POUND-INCHES, 5`)
Main Entry Door No. 5 Adjustment
Figure 501 (Sheet 6)

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-11-09
 ALL  ú ú 01 Page 509 ú Feb 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
F55120
A
747-400
MAINTENANCE MANUAL

GUIDE ARM UPPER HINGE CAVITY
(DOOR SHOWN IN THE OPEN POSITION
TO GIVE A BETTER VIEW)

Main Entry Door No. 5 Adjustment
Figure 501 (Sheet 7)

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-11-09
 ALL  ú ú 01 Page 510 ú Jun 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
F77936
A

747-400
MAINTENANCE MANUAL

WIRE BUNDLE RETRACTION MECHANISM

DOORSILL

7.50 INCHES IS SATISFACTORY IF YOU DID NOT CHANGE THE RETRACTION MECHANISM AND THE RETRACTION MECHANISM OPERATES SMOOTHLY.
Main Entry Door 5 Adjustment Figure 501 (Sheet 8)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-11-09
 ALL  ú ú 01 Page 511 ú Jun 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

MEASURE DOOR FLUSHNESS ONLY IN AREAS OF THE TOP AND BOTTOM HINGE COVERS. THIS
WHERE DIMENSIONS ARE SHOWN.
TOLERANCE IS NOT FOR THE HORIZONTAL EDGES.
Flushness and Skin Clearance Requirements Figure 502 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-11-09
 ALL  ú ú 04 Page 512 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

0.18

INCH
0.06
(TOP AND SIDES)
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 艙門 DOORS 1(72)