曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Latching Mechanism (Fig. 1)
__________________
 A.  The door latching mechanism consists of four latch pins which project through the four door keeper fittings and engage keeper fittings attached to the door jamb (Detail B, Fig. 1). The latch pins are actuated by a rack and pinion mechanism. The inner edge of each latch pin is in the form of a rack; all four racks engage with a pinion gear on the actuator shaft which connects to the interior handle (Detail C, Fig. 1). The exterior handle shaft, containing a spring, slides within the actuator shaft. The spring functions to move the exterior handle shaft outward to engage the actuator shaft.
Operation (Fig. 1)
_________
 A.  Functional Description
 (1)  
The hatch is opened from inside the airplane by rotating the interior handle counterclockwise 180 degrees. Operation of the interior handle rotates the pinion gear on the actuator shaft. As the pinion gear rotates on the racks of the four latch pins, the latch pins move inward, guided by rollers mounted on the handle mechanism housing, disengaging the fuselage keeper fittings. With latch pins disengaged, the door is rotated down and outboard on its hinges.

 (2)  
The hatch is opened from outside the airplane by pressing the release trigger which allows the exterior handle to spring out from its recessed position. The outward movement of the exterior handle engages the actuator shaft. As the exterior handle is rotated clockwise 180 degrees, the interior handle rotates counterclockwise and the door functions as when opened from inside the airplane.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-21-00
 ALL  ú ú 01 Page 1 ú Jun 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL 
SEE A HATCH  RELEASE TRIGGER  EXTERIOR HANDLE 

SEE B
INTERIOR
PANEL

FWDLATCH
PIN
HANDLE RACK
MECHANISM
SEE C NOTE:SKIN OMITTED FOR CLARITY.
HATCH
INTERIOR (EXTERIOR VIEW) HANDLE
A
DOOR KEEPER FITTING (4 LOCATIONS)
LATCH PIN (4 LOCATIONS)
VELCRO TAPE
(16 LOCATIONS)

HINGE
ARM
FWD
HATCH (INTERIOR VIEW) NOTE:____ THE TWO HANDLES SHOULD BE INSTALLED SO THE ARROW ON THE HANDLE POINTS FORWARD A WHEN THE HATCH IS LOCKED.
Crew Compartment Overhead Hatch
Figure 1 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-21-00
 ALL  ú ú 01 Page 2 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
EXTERIOR
TRIGGER HANDLE HANDLE HOUSING
SPACER
SPACER
WASHER
BEARING
PLATE WASHER
C
Crew Compartment Overhead Hatch
Figure 1 (Sheet 2)

RACK AND PIN ASSEMBLY (TYP)
WASHER (4 PLACES)
INNER HANDLE
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-21-00
 ALL  ú ú 01 Page 3 ú Jun 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
SPRING 
ACTUATOR 
O-RING 

A
747-400
MAINTENANCE MANUAL

 (3)  
The hatch is closed from inside the airplane by rotating the hatch upward and inboard until the door keeper fittings contact the door jamb keeper fittings. The interior handle is rotated clockwise 180 degrees. Operation of the interior handle rotates the pinion gear of the actuator shaft. As the pinion gear rotates on the racks of the four latch pins, the latch pins move outward, guided by rollers mounted on the handle mechanism housing, engage the doorjamb keeper fittings, and latch the hatch closed.

 (4)  
The hatch is closed from outside the airplane by rotating the hatch upward and inboard until the door keeper fittings contact the doorjamb keeper fittings. The exterior handle is rotated counterclockwise 180 degrees and the latching mechanism operates as when the hatch is closed from inside the airplane. With the hatch latched and the arrow on the exterior handle pointing forward, the exterior handle is pushed toward and latched in its flush position.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 艙門 DOORS 1(135)