EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-11-01
 ALL  ú ú 03 Page 405 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 494-067
 (9)  Install the safety barrier in the door opening.
 TASK 52-11-01-404-056
 3.  Entry Door No. 1 Installation (Fig. 401 and Fig. 402)_____________________________
 A. Special Tools and Equipment
 (1)  
Maintenance Stand

 (2)  
11PRE65B00040 Safety Barrier, Entry Door

 (3)  
OHME65B01836 Sling

 B.
References

 (1)  
AMM 25-59-01/401, Main Deck Compartment Cargo Lining Panel

 (2)  
AMM 52-09-02/201, Flap-Type Mechanical Seals

 (3)  
AMM 52-11-01/501, Main Entry Door

 (4)  
AMM 52-11-02/401, Main Entry Door Lining and Insulation

 (5)  
AMM 52-11-04/401, Main Entry Door Guide Arm

 (6)  
AMM 52-11-11/401, Body Hinge Torque Tube

 (7)  
AMM 52-11-14/401, Main Entry Door Hinge Flaps

 (8)  
AMM 52-71-00/501, Door Warning System

 C.
Access

 (1)  
Access Panel 211AL Panel, Access - Door Maintenance (Door 1, LH) 831L Door - No. 1 Main Entry, LH

 D.
Prepare for Installation

 S 944-061
 (1)  
Make sure the maintenance stand is installed outboard of the door opening.

 S 644-019

 (2)  
Do these steps to apply grease to the upper and lower hinge bearings on the body torque tube to prevent the entry of water.

 (a)  
At the upper hinge arm, fill the hole on the upper side of the bearing in the lower bearing plate (Detail A).

 (b)  
At the lower hinge arm, fill the hole on the upper side of the bearing in the bearing plate on the upper guide plate (Detail B).

 S 644-020
 (3)  
Do these steps to apply grease to the hinge bearings on the body torque tube to prevent the entry of water:

 (a)  
Fill the hole on the upper side of the bearing at the door adjustment nut (Detail C).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-11-01
 ALL  ú ú 03 Page 406 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (b)  Fill the hole on the upper side of the bearing in the hinge housing below the upper hinge arm.
 S 434-021
 (4)  
Examine and install the new seals, if it is necessary
 (AMM 52-09-02/201).

 S 214-022

 (5)  
Examine and repair the seal depressor surface on the body as necessary to make sure the minimum seal leakage.

 E.
Procedure

 (1)  S 094-023Remove the safety barrier.
 (2)  S 494-024Connect the sling to the door.
 (3)  S 424-025Install the main entry door. (a) Turn the door upper and lower hinge arms (8, 16) to the door open position. (b) Lift the entry door near to the door opening with the hinge arms adjacent to the hinge links on the body torque tube.
 CAUTION:_______ DO NOT TRY TO MOVE THE LOWER HINGE ARM UP OR DOWN ON THE TORQUE TUBE; IT IS NOT ADJUSTABLE. IF YOU TRY TO MOVE THE LOWER HINGE ARM, DAMAGE CAN OCCUR.
 (c) (d) (e)  Move the upper hinge arm up or down as necessary to adjust the distance between the hinge arms and the hinge link (Detail B).Connect the lower hinge arm to the hinge bellcrank link on the body torque tube.Connect the upper hinge arm to the hinge link.
 (4)  S 094-026Remove the hoist sling.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-11-01
 ALL  ú ú 02 Page 407 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 艙門 DOORS 1(33)