(2)
32-14-00/501, Body Gear Doors

 (3)
32-14-01/401, Body Gear Wheel Well Inboard Door

 (4)
32-14-02/601, Body Gear Wheel Well Outboard Door

 (5)
32-14-03/401, Body Gear Wheel Well Door Safety Bar

 D.
Access

 (1)  
Location Zone 754 Body Landing Gear Forward Outboard Door, LH 764 Body Landing Gear Forward Outboard Door, RH

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-14-02
 ALL  ú ú 01 Page 404 ú Feb 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 E. Procedure
 S 224-008
 (1)  
Examine the worn parts and the fittings for approved worn areas (Ref 32-14-02/601).

 S 424-009

 (2)  
Install the outboard door.

 (a)  
Set the door (1) with the sling assembly for installation.

 (b)  
Install the bolts (5) and the washers (4 and 8).

 (c)  
Engage the minimum necessary quantity of the nut (9) to install the cotter pin (10).

 NOTE: Use minimum quantity of the washer to keep the
____ clearance 0.01 - 0.06 inch below the nut.
 (d)  
Install the bushing (18) in the bracket as shown on detail C, Fig. 401.

 (e)  
Align the linkage rod with the bracket clevis.

 (f)  
Install the bolt (16), the washers (17 and 19), and the nut (20).

 (g)  
Use the washers (3) and the bolts (6 and 7) to install the bonding jumpers (2).

 (h)  
Align the actuator rod with the door clevis.

 (i)  
Install the bolt (11), the washers (14 and 15), the bushing (12), and the nut (13).

 S 434-010
 (3)  
Install the safety bar of the wheel well for the body landing gear (Ref 32-14-03/401).

 S 414-011

 (4)  
Install the inboard door of the wheel well for the body landing gear (Ref 32-14-01/401).

 S 824-012

 (5)  
Adjust the outboard door of the wheel well for the body landing gear (Ref 32-14-00/501).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-14-02
 ALL  ú ú 01 Page 405 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 094-017
 WARNING:_______ YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO REMOVE THE
 DOOR LOCKS FROM THE LANDING GEAR DOORS.  THE DOORS CAN CLOSE
 QUICKLY IF YOU DO NOT REMOVE THE DOOR LOCKS CORRECTLY.  THIS

 CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
 (6)  
Do this task: "Removal of the Door Locks on the Wing Landing Gear" (Ref 32-00-30/201).

 S 094-018

 (7)  
Do this task: "Removal of the Door Locks on the Body Landing Gear" (Ref 32-00-30/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-14-02
 ALL  ú ú 01 Page 406 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 BODY GEAR WHEEL WELL OUTBOARD DOOR - INSPECTION/CHECK
_____________________________________________________
 1.  General_______
 A.  This procedure examines the door hinge assemblies and the attach fitting of the linkage rod clevis for worn areas.
 TASK 32-14-02-206-001
 2.  Body Gear Wheel Well Outboard Door for Wear Inspection______________________________________________________
 A.  References
 (1)  
20-11-01/401, Bushings and Bearings

 (2)  
32-14-02/401, Body Gear Wheel Well Outboard Door

 (3)  
IPC 32-14-02 Fig. 2

 B.  
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 3(85)