(4)  
B00316 Cleaning Solvent - TT-N-95, Type II (alternate)

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-13-06
 ALL  ú ú 01 Page 206 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 D. Parts
 ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 201 | 1 | Apex Bolt | 32-13-10 | 01 | 70 | | | 2 | Lube Insert | | | 55 | | | 3 | O-Rings | | | 65 | | | 4 | Tang Washer | | | 75 | | | 5 | Nut | | | 80 | | | 6 | Lockbolt | | | 40 | | | 7 | Flat Washer | | | 45 | | | 8 | Self-Locking Nut | | | 50 | | | 9 | Lower Drag Strut | 32-13-06 | 02 | 10 | | | 10 | Lube Insert | 32-13-07 | 01 | 50 | | | 11 | O-Rings | | | 60 | | | 12 | Drag Strut Bolt | | | 65 | | | 13 | Self-Locking Nut | | | 45 | | | 14 | Flat Washer | | | 40 | | | 15 | Lockbolt | | | 35 | | | 16 | Nut | | | 75 | | | 17 | Tang Washer | | | 70 | | | 18 | Downlock Bungee | 32-33-16 | 02 | 40 | 2......…........…...................................…..........….....….........1
 E. References
 (1)  
AMM 07-11-01/201, Jacking Airplane

 (2)  
AMM 09-11-00/201, Towing

 (3)  
AMM 29-11-00/201, Hydraulic Supply System

 (4)  
AMM 32-00-30/201, Landing Gear Door Locks

 (5)  
AMM 32-33-16/401, Body Gear Downlock Bungee

 F.
Access

 (1)  
Location Zone
 755 Body Landing Gear, LH
 765 Body Landing Gear, RH

 G.
Prepare for the Installation

 S 222-015
 (1)  
Examine these parts for worn areas as specified in the Body Landing Gear Lower Drag Strut Examination:

 (a)  
lower drag strut (9)

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-13-06
 ALL  ú ú 01 Page 207 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (b)  
attach points

 (c)  
apex bolt

 (d)  
bungee/jury strut bolt

 (e)  
drag strut/universal bolt.

 S 112-016
 (2)  
Clean all the bolts, the washers, the nuts, the inserts, and the mating surfaces with solvent.

 S 432-017

 (3)  
Prepare bolt assemblies for installation.

 (a)  
Examine the O-rings (3 and 11) for worn areas or damage and replace them if it is necessary.

 (b)  
Apply a large quantity of grease to the O-rings (3 and 11).

 (c)  
Lubricate inserts (2 and 10) and the inner surface of bolts (1 and 12).

 (d)  
Put the O-rings (3) on the lubrication insert (2).

 (e)  
Lubricate the lubrication insert (2) again if it is necessary.

 (f)  
Put the O-rings (11) on the lubrication insert (10).

 (g)  
Lubricate the lubrication insert (10) again if it is necessary.

 (h)  
Put the lubrication insert (2) into the bolt (1).

 (i)  
Align the hole for the lockbolt.

 (j)  
Put the lubrication insert (10) into the bolt (12).

 (k)  
Align the hole for the lockbolt.

 H.
Procedure

 S 422-018
 (1)  
Install the sling on the lower drag strut (9) and lift the strut into its position.

 S 432-019

 (2)  
Install the apex bolt assembly into the lower drag strut.

 (a)  
Lubricate all the threads, washer faces, bolt shanks and bushing surfaces with grease immediately before the installation.

 (b)  
Install the apex bolt (1), the lubrication insert (2), and the O-rings (3) into the drag strut.

 (c)  
Install the washer (4) and the nut (5).

 (d)  
Tighten the nut to 10-15 pound-feet.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 3(7)