S 226-003
 (1)  
Do this task: "The Wheel Truck Removal on the Wing Landing Gear" (Ref 32-11-11/401).

 (a)  
Remove the pivot bolt assembly.

 (b)  
Remove the lower torsion link.

 (c)  
Remove the forward axle assemblies.

 (2)
Examine the components of the wheel truck for worn areas.

 S 226-005
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-11
 ALL  ú ú 01 Page 601 ú Oct 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
 (3)  S 216-006Examine the fit of the pivot bolt, the lower torsion link, the forward axle and the universal bolt assemblies. (a) Measure the parts at the locations shown in figure 601. (b) Compare the measured dimensions to the wear limits in figure 601. (c) If a part is not in tolerance, replace the part if you cannot repair it.
 (4)  S 426-004Do this task: "The Wheel Truck Installation on the Wing Landing Gear" (Ref 32-11-11/401).
 (5)  S 426-007Install the lower torsion link.
 (6)  S 426-008Install the universal.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-11
 ALL  ú ú 01 Page 602 ú Oct 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

SEE  A 
A  1  B  B 
A  C  C 
A 
1  Wing Gear Wheel Truck Wear Limits Figure 601 (Sheet 1) FOR LOWER TORSION LINK INSPECTION/CHECK. REFER TO 32-11-14/601

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-11
 ALL  ú ú 01 Page 603 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
1. BUSHING/PIVOT PIN

A-A
2. BUSHING/WING GEAR

B-B

Wing Gear Wheel Truck Wear Limits
Figure 601 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-11
 ALL  ú ú 01 Page 604 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

C-C

2  FOR WHEEL BEARING/SLEEVE WEAR LIMITS REFER TO 32-45-03/801.
Wing Gear Wheel Truck Wear Limits
Figure 601 (Sheet 3)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-11
 ALL  ú ú 01 Page 605 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

NO. INDEX  PART NAME  DIM.  DESIGN LIMITS  WEAR LIMITS  WORN PART REPLACE  PART WORN REPAIR  INSTR REPAIR 
DIAMETER  PER-MITTED WEAR DIM. 4  DIA MAX ANCE CLEAR-
MIN  MAX 
1  BUSHING  ID  4.5000  4.5015  4.5057  0.0077  X 
PIN  OD  4.4980  4.4990  4.4938  X  9 
2  BUSHING  ID  1.2500  1.2510  1.2532  0.0062  X 
BOLT  OD  1.2470  1.2490  1.2448  X  9 
3  BUSHING  ID 
BUSHING  OD  6.1970  6.1990  6.1920  X 
4  SLEEVE 10  ID  5.1245  5.1255  3  X 
AXLE  OD  5.1275  5.1290  5.1260  X 
5  SLEEVE 10  ID  5.4945  5.4955  3
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 2(11)