32-00-30
ALL ú ú 01 Page 207 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
B. Access
(1)
Location Zone
753 Body Landing Gear Door, Inboard, LH
754 Body Landing Gear Door, Outboard, LH
763 Body Landing Gear Door, Inboard, RH
764 Body Landing Gear Door, Outboard, RH
C.
Procedure (Fig. 203)
S 492-013
(1) Make sure that you install the ground locks for the landing gear (Ref 09-11-00/201).
S 612-065
CAUTION: MAKE SURE YOU DO THESE STEPS BEFORE YOU OPERATE THE DOORS:
_______ MAKE SURE SHOCK STRUTS (OLEOS) FOR THE BODY GEAR HAVE THE CORRECT MINIMUM DIMENSION. MAKE SURE THE TIRES ARE AT THE CORRECT PRESSURE. IF YOU DO NOT OBEY THESE INSTRUCTIONS, THE DOOR CAN HIT AND CATCH ON THE TIRES. IF THE STRUT AND TIRES ARE DEFLATED, THE BODY GEAR DOORS WILL HIT THE GROUND WHEN YOU OPEN THEM.
(2) Make sure the minimum X dimension for the body gear struts (oleos) is as shown on the foil marker.
NOTE: The marker is on the inner surface of the gear strut door,
____
below the handle.
S 612-066
(3) Make sure the tires are at the correct pressure (AMM 12-15-06/301).
S 862-128
WARNING: MAKE SURE THAT ALL PERSONS AND EQUIPMENT ARE CLEAR OF THE DOOR
_______ OPERATION AREA. FAST MOVEMENT OF THE DOORS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(4) Move the ground release handle for the wing and body gear doors to the Doors Open position.
NOTE:____This will open the wing and body gear doors. Handles for main gear doors are on the keel beams near the aft inboard corners of wheel wells for the body gear. You can get to the handles through the strut door openings for the body gear.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-00-30
ALL ú ú 01 Page 208 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
SEE A
BODY GEAR
WHEEL WELL
OUTBOARD DOOR
OPERATOR
BODY GEAR RODS
WHEEL WELL INBOARD DOOR SEE C SEE B SAFETY BAR
FWD
A
LINKAGE ROD
BODY GEAR WHEEL WELL OUTBOARD DOOR
BOLT
NUT BOLT
OPERATOR
FWD
ROD
NUT
B
BODY GEAR WHEEL WELL INBOARD DOOR
FWD
C
Body Gear Wheel Well Inboard Door Operator Rod Connection
Figure 203
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-00-30
ALL ú ú 05 Page 209 ú Feb 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
S 862-015
(5) Release the pressure from hydraulic system No. 1 and No. 4 (AMM 29-11-00/201).
S 022-016
CAUTION: HOLD UP THE WHEEL WELL INBOARD DOOR OF THE BODY GEAR BEFORE YOU
_______ REMOVE THE OPERATOR RODS. IF YOU LET A DOOR HANG IT CAN CAUSE DAMAGE TO EQUIPMENT.
(6)
Disconnect the operator rods from the inboard and outboard wheel well doors of the body gear.
S 492-037
(7)
Put a warning streamer on the end of each rod.
S 032-017
WARNING: HOLD THE DOORS OPEN OR KEEP THE DOOR OPERATION AREA CLEAR.
_______ FAST MOVEMENT OF THE LANDING GEAR DOORS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(8) Disconnect the operator rods from the wing gear doors (Ref Disconnect the Wing Gear Door Operator Rods) or install wing gear door locks (Ref Install the Wing Gear Door Locks) if necessary.
TASK 32-00-30-492-018
5. Nose Landing Gear Door Lock Installation
________________________________________
A. Special Tools and Equipment
(1)
11MIT65B04012 - Nose Landing Gear Door Lock (10MIT65B04012 alternate, rework from 7MIT65b04012)
B.
References
(1)
09-11-00/201, Towing
(2)
29-11-00/201, Main Hydraulic Supply System
C.
Access
(1) 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 1(26)
