IN-AIR CONDITION.
(1)
If the sensor or target bracket is moved or damaged, then do the task to measure the wing landing gear truck sensor clearance (AMM 32-61-22/201).
S 492-007
(2)
Make sure that you install the ground locks for the landing gear (AMM 09-11-00/201).
S 612-074
CAUTION: MAKE SURE YOU DO THESE STEPS BEFORE YOU OPERATE THE DOORS:
_______ MAKE SURE SHOCK STRUTS (OLEOS) FOR THE BODY GEAR HAVE THE CORRECT MINIMUM DIMENSION. MAKE SURE THE TIRES ARE AT THE CORRECT PRESSURE. IF YOU DO NOT OBEY THESE INSTRUCTIONS, THE DOOR CAN HIT AND CATCH ON THE TIRES. IF THE STRUT AND TIRES ARE DEFLATED, THE BODY GEAR DOORS WILL HIT THE GROUND WHEN YOU OPEN THEM.
(3) Make sure the minimum X dimension for the body gear struts (oleos) is as shown on the foil marker.
NOTE: The marker is on the inner surface of the gear strut door,
____ below the handle.
S 612-075
(4) Make sure the tires are at the correct pressure (AMM 12-15-06/301).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-00-30
ALL ú ú 01 Page 205 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
SEE A
FWD
SEE B
WING GEAR WHEEL WELL OUTBOARD DOOR
INBOARD DOOR OPERATOR ROD OPERATOR ROD WING GEAR WHEEL
A
WELL INBOARD DOOR
WING GEAR
WHEEL WELL
INBOARD DOOR
BUSHING COTTER PIN
NUT
FWD B
Wing Wheel Well Inboard Door Operator Rods Connection Figure 202
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-00-30
ALL ú ú 02 Page 206 ú Jun 10/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 862-087
WARNING: MAKE SURE THAT ALL PERSONS AND EQUIPMENT ARE CLEAR OF THE DOOR
_______ OPERATION AREA. FAST MOVEMENT OF THE DOORS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(5) Move the ground release handle for the wing and body gear doors to the DOORS OPEN position.
NOTE:____This will open the wing and body gear doors. Handles for main gear doors are on the keel beams near the aft inboard corners of body gear wheel wells. You can get to the handles through the strut door openings for the body gear.
S 862-127
(6)
You must keep the ground release handle in the doors open position and locked when the doors are open.
S 862-009
(7)
Release the pressure from hydraulic system No. 1 and No. 4 (AMM 29-11-00/201).
S 022-010
(8)
Disconnect the operator rod from the inboard door of the wheel well for the wing gear.
S 492-081
(9)
Put a warning streamer on the end of the rod.
S 492-089
WARNING: HOLD THE DOORS OPEN OR KEEP THE DOOR OPERATION AREA CLEAR.
_______ FAST MOVEMENT OF THE LANDING GEAR DOORS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(10) Disconnect the operator rods from the body gear doors (Ref Disconnect the Body Gear Door Operator Rods) or install body gear door locks (Ref Install the Body Gear Door Locks) if necessary.
TASK 32-00-30-002-012
4. Body Landing Gear Door Operator Rods Disconnection__________________________________________________
A. References
(1)
09-11-00/201, Towing
(2)
12-15-06/301, Landing Gear Tire
(3)
29-11-00/201, Main Hydraulic Supply System
(4)
IPC 32-33-28 Fig. 1
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 1(25)
