32-11-06
 ALL  ú ú 04 Page 410 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 WING LANDING GEAR LOWER SIDE STRUT - INSPECTION/CHECK
_____________________________________________________
 1.  General_______
 A.  This procedure contains a task to measure the fit of the lower side strut assemblies on the wing landing gear. These assemblies include:
 (1)  
The apex bolt and pin assembly.

 (2)  
The downlock actuator and the pin assembly on the lower side strut.

 (3)  
The lower spindle bolt and pin assembly.

 B.  
To do this procedure , you must remove the lower side strut.

 TASK 32-11-06-206-001
 2.  Lower Side Strut on the Wing Landing Gear - Inspection (Fig. 601)______________________________________________________
 A.  References
 (1)  
32-11-06/401, Wing Gear Lower Side Strut

 (2)  
32-11-07/201, Wing Gear Side Strut Lower Spindle

 (3)  
AIPC 32-11-07, Fig. 2

 (4)  
AIPC 32-11-10, Fig. 2

 (5)  
AIPC 32-32-15, Fig. 1

 B.  
Access

 (1)  
Location Zone
 735 Wing Landing Gear, LH
 745 Wing Landing Gear, RH

 C.  
Procedure

 S 026-002
 (1)  
Do this task: "Lower Side Strut Removal on the Wing Landing Gear" (Ref 32-11-06/401).

 S 036-006

 (2)
Do the steps that follow after you remove the lower side strut.

 (a)  
Disassemble the apex bolt and pin assembly.

 (b)  
Disassemble the downlock actuator and pin assembly on the lower side strut (Ref 32-11-06/401).

 (c)  
Disassemble the lower spindle bolt and pin assembly (Ref 32-11-07/201).

 S 226-003
 (3)  Examine the components of the lower side strut for corrosion and damage.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-06
 ALL  ú ú 01 Page 601 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 S 216-007
 (4)  Examine the fit of the apex pin, the lower spindle pin and the downlock actuator and shock strut connection assemblies.
 (a) (b)  Measure the parts at the locations shown in figure 601.Compare the measured dimensions to the wear limits in figure 601.
 (c)  If the part is not in tolerance, replace the part if you cannot repair it.
 S 426-004
 (5)  Do this task: "Wing Landing Gear Lower Side Installation" (Ref 32-11-06/401).
 S 436-008
 (6)  Install the spindle assembly on the lower side strut (Ref 32-11-07/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-06
 ALL  ú ú 01 Page 602 ú Jun 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

1.  UPPER
SIDE
STRUT

SEE A
2.  DOWNLOCK BUNGEE
8.  HOSE
CLAMPS

3.  LOWER JURY STRUT
A
4.  DOWNLOCK ACTUATOR
9.  APEX
HOSE
BRACKET

A
5.  HYDRAULIC LINES
B B
6.  LOWER SIDE STRUT
FWD
1
7.  LOWER
SPINDLE 1
FOR LOWER SIDE STRUT SPINDLE
BOLT INSPECTION/CHECK

(REFER TO 32-11-07/201)  A
Wing Gear Lower Side Strut Wear Limits
Figure 601 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-06
 ALL  ú ú 02 Page 603 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 1(142)