EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-08
 ALL  ú ú 01 Page 602 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

1. BUSHING/BOLT BOLT

UPPER JURY STRUT

3.  BUSHING/BOLT (6 PLACES) JURY STRUT SPINDLE
A-A

B-B
Main Gear Upper Jury Strut Wear LimitsFigure 601 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-08
 ALL  ú ú 01 Page 603 ú Jun 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

INDEX NO.  PART NAME  DIM.  DESIGN LIMITS  WEAR LIMITS  REPLACE PART WORN  REPAIR WORN PART  REPAIR INSTR. 
DIAMETER  DIM. WEAR PER-MITTED 6  ANCE DIAM MAX CLEAR-
MIN  MAX 
1  BOLT  1  3.381  3.404  3.444  0.080  X  4 
BUSHING  2  3.364  3.380  3.324  X  5 
2  BUSHING  3  1.624  1.632  1.652  0.040  X  4 
BUSHING  2  1.612  1.624  1.592  X  4 
3  BUSHING  ID  1.000  1.0010  1.0055  0.0065  X  4 
BOLT  OD  0.998  0.999  0.996  X  5 
4  BOLT  1  7.190  7.215  7.237  0.060  X  4 
BUSHING  2  7.177  7.189  7.155  X  5 
5  BUSHING  3  5.437  5.449  5.474  0.050  X  4 
BUSHING  2  5.424  5.436  5.399  X  4 
6  BUSHING  ID  1.2500  1.2510  1.2550  0.0067  X  4 
BOLT  OD  1.2480  1.2490  1.2460  X  5 
7  BUSHING  ID  1.2500  1.2515  1.2550  0.0067  X  4 
BOLT  OD  1.2480  1.2490  1.2460  X  5 

DISTANCE BETWEEN HEAD AND SHOULDER OF BOLT, LESS THICKNESS OF WASHER, PLUS POSSIBLE ONE-SIXTH TURN BACKOFF OF NUT DISTANCE OVER FLANGES OF BUSHINGS DISTANCE BETWEEN FLANGES OF BUSHINGS OBTAIN REPLACEMENT BUSHING. INSTALL BUSHING PER 20-11-01 WITH INTERFERENCE FIT WORN PART IS REPAIRABLE. SEE OVERHAUL MANUAL FOR REPAIR INSTRUCTIONS LIMITS SHOWN MAY BE EXCEEDED PROVIDED MAXIMUM CLEARANCE IS NOT EXCEEDED
Wing Gear Upper Jury Strut Wear Limits
Figure 601 (Sheet 3)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-08
 ALL  ú ú 01 Page 604 ú Jun 10/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 WING GEAR JURY STRUT SPINDLE - REMOVAL/INSTALLATION
___________________________________________________
 1.  General
_______
 A.  This procedure has two tasks:
 (1)  
The removal of the jury strut spindle for the wing landing gear (referred to as the jury strut spindle).

 (2)  
The installation of the jury strut spindle.

 B.  
The jury strut spindle is attached to the inboard side of the shock strut at the outboard end of the upper jury strut. The removal and the installation procedures are the same for the two sides.

 TASK 32-11-09-004-001
 2.  Jury Strut Spindle Removal (Fig. 401)
__________________________
 A.  Special Tools and Equipment
 (1)  
2MIT65B08803-1 - Wing Landing Gear Bungee Restraining Tool

 (2)  
6PRE65B00161-1 - Wing Gear Jury Strut Spindle Protective Equipment (Thread Protector)

 (3)  
7PRE65B00161-1 - Wing Gear Jury Strut Spindle Bolt Protective Equipment (Thread Protector)
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 1(153)