S 424-022
(2) Install the display transfer module:
(a)
Remove the dust caps from the electrical connector(s).
(b)
Examine the module's electrical connector(s) for loose, bent, or broken pins.
(c)
Connect the electrical connector(s) to the module.
(d)
Put the module carefully into the instrument panel.
(e)
Install the screws into the front of the module.
S 864-023
(3) Close these circuit breakers and remove the DO-NOT-CLOSE tags:
(a) P7, Overhead Circuit Breaker Panel
1) 7F9, EIU L
2) 7F10, EIU C
3) 7F12, ND L
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
31-61-06
ALL ú ú 05 Page 402 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
4) 7F13, PFD L
5) 7F14, LWR EICAS
6) 7F15, EIU R
7) 7F17, ND R
8) 7F18, PFD R
S 864-024
(4)
Supply the electrical power (AMM 24-22-00/201).
S 714-025
(5)
Do a test of the display transfer module:
(a)
Set the INBD CRT and LWR CRT switches on the display transfer modules to the NORM position.
(b)
Set the EIU SEL switch on the EICAS control panel/FMC switch to the AUTO position.
(c)
Set the EIU switches on the source select modules to the AUTO position.
(d)
Make sure that the six integrated display units (IDUs) show these formats: 1) The outboard DUs show the PFD format. 2) The inboard DUs show the ND format. 3) The upper EICAS DU shows the primary engine format.
(e)
Set the INBD CRT switches to the PFD position. 1) Make sure that the inboard IDUs show the PFD format.
(f)
Set the INBD CRT switches to the NORM position. 1) Make sure that the inboard IDUs show the ND format.
S 864-026
(6) Remove the electrical power if it is not necessary (AMM 24-22-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
31-61-06
ALL ú ú 02 Page 403 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
SOURCE SELECT MODULE - REMOVAL/INSTALLATION
___________________________________________
1. General_______
A. This subject has two tasks. The first task is to remove the source select module from the pilots' instrument panel. The second task is to install the source select module into the pilots' instrument panel. The installation task includes a test of the installation of the module.
B. The captain's source select module (P1 panel) contains five source select switches, one clock, and one radio magnetic indicator. The first officer's source select module (P3 panel) contains five source select switches and one clock.
TASK 31-61-07-024-044
2. Source Select Module Removal____________________________
A. References
(1) AMM 31-25-01/401, Clocks
B. Access
(1) Location Zone
221 Control Cabin, LH
222 Control Cabin, RH
C. Procedure
S 014-022
(1)
Remove the clock from the instrument panel (AMM 31-25-01/401).
S 864-024
(2)
Open these circuit breakers and attach DO-NOT-CLOSE tags:
(a)
P7, Overhead Circuit Breaker Panel
1) 7F9, EIU L
2) 7F10, EIU C
3) 7F15, EIU R
(b)
P6, Main Power Distribution Panel
1) 6E19, CAPT PANEL FLT DK LIGHTS
2) 6E23, F/O PANEL FLT DK LIGHTS
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機維護手冊 指示/記錄系統 2(159)
