(h)  
Set the range select switch to 640. 1) Make sure the ND shows a 320 on the center of the display.

 (i)  
Set the range select switch to 80.

 S 735-813
 (3)  Do a test of the ND display select switches:
 (a)  
Push the WXR button.

 (b)  
Set the mode selector switch on the control panel for the weather radar to the TEST position.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-61-00
 ALL  ú ú 04 Page 516 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 CAUTION: WHEN THE WEATHER RADAR TRANSMITS RF ENERGY, MAKE SURE
_______ THERE ARE NO LARGE METAL OBJECTS IN AN AREA 300 FEET OR LESS AND IN A 180-DEGREE SECTOR IN FRONT OF THE AIRPLANE. IF LARGE METAL OBJECTS ARE IN THIS AREA WITH THESE CONDITIONS, DAMAGE TO THE WEATHER RADAR RECEIVER CAN OCCUR.
 1)  Make sure the ND shows the WRX annunciator on the left side of the display.
 (c)  
Push the WXR button.

 (d)  
Push the STA button.

 1)  Make sure the ND shows the STA annunciator on the left side of the display.

 (e)  
Push the WPT button.

 1)  Make sure the ND shows the WPT annunciator on the left side of the display.

 (f)  
Push the ARPT button.

 1)  Make sure the ND shows the ARPT annunciator on the left side of the display.

 (g)  
Push the DATA button.
 1) Make sure the ND shows the waypoint data.

 (h)  
Push the POS button. 1) Make sure the ND shows the IRS position indicator.

 S 735-814
 (4)  Do a test of the DH MDA switch:
 (a)  
Set the switch to the DH position.

 (b)  
Turn the center knob on the switch clockwise and counterclockwise. 1) Make sure the decision height (DH) on the PFD changes when

 you turn the center knob.

 (c)  
Turn the center knob on the switch to show a DH of 0.

 (d)  
Push and hold the TEST button on the radio altimeter R/T, which is found in the E9 rack on the center equipment bay. 1) Make sure that the PFD shows an altitude of approximately

 40 feet.

 (e)  
Turn the center knob on the switch clockwise until the DH is equal to the radio altimeter altitude. 1) Make sure that the white DH annunciator becomes amber and

 that it flashes momentarily.

 (f)  
Push the RST button on the switch. 1) Make sure that the amber DH annunciator becomes white.

 (g)  
Release the TEST button on the radio altimeter R/T.

 (h)  
Set the switch to the MDA position.

 (i)  
Turn the center knob on the switch clockwise and counterclockwise. 1) Make sure the minimum descent altitude (MDA) changes on the

 PFD when you turn the center knob.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-61-00
 ALL  ú ú 03 Page 517 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 735-818
 (5)  Do a test of the FPV switch:
 (a)  Push the FPV switch.
 1)  Make sure the PFD shows the symbol for the flight path vector.
 NOTE: If the symbol for the flight path vector does not
____ show, push the FPV switch.
 (b)  Push the FPV switch.
 1)  Make sure the PFD does not show the symbol for the flight path vector.
 S 735-819
 (6)  Do a test of the MTRS switch:
 (a)  Push the MTRS switch.
 1)  Make sure the PFD shows the selected and the actual altitudes in meters and in feet.
 NOTE: If the PFD does not show the selected and the actual
____ altitudes in meters, push the MTRS switch again.
 (b)  Push the MTRS switch.
 1)  Make sure the PFD shows the selected and the actual altitudes in feet only.
 S 735-820
 (7)  Do a test of the ADF/VOR switches:
 (a)  
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 指示/記錄系統 2(136)