M118 ENGINE 1 & 2 VIBRATION MONITOR UNIT (E1-1)
M7846 ENGINE 3 & 4 VIBRATION MONITOR UNIT (E2-1)

Engine Interface Figure 68 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-61-00
 ALL  ú
 ú  06  Page 88E
 ú  Jun 15/98 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

DIGITIZER (M7603)
Surface Position System Interface Figure 69
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-61-00
 ALL  ú
 ú  04  Page 88F
 ú  Feb 10/92 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (2)  
Data such as control wheel, rudder pedal and column position is also received by the EIUs from the SPDs, this data is processed for display on the EICAS flight controls maintenance format.

 (3)  
The data obtained from the interface is also processed by the EIU for the generation of EICAS crew alerting and status messages.

 I. Flap System Interface (Fig. 70)
 (1)  
Digital discrete data for leading and trailing edge flaps is received by the EIUs on ARINC 429 data buses from the Flap Control Units (FCUs). This data is processed for display on the EICAS primary and compacted formats, and the EICAS flight controls maintenance format.

 (2)  
Flap position and flap lever position is also received from the FCUs. This data is processed for display on the EICAS primary and compacted formats.

 (3)  
Data such as trailing edge flap, flap actuator, flap drive RVDT, flap handle RVDT, and horizontal stabilizer position is received by the EIUs from the FCUs. This data is processed for display on the EICAS flight controls maintenance format.

 (4)  
The data obtained from the interface is also processed by the EIUs for the generation of EICAS crew alerting and status messages.

 J. Automatic Stabilizer Trim Interface (Fig. 71)
 (1)  Digital discrete data from the Stabilizer Rudder Module (SRM) is received by the EIUs on an ARINC 429 data bus. This data is processed by the EIUs for the generation of EICAS crew alerting and status messages.
 K. Oxygen System Interface (Fig. 72)
 (1)  
Analog information for the crew and passenger oxygen pressure is received by the EIUs as direct analog inputs. This information is processed for display on the EICAS status format.

 (2)  
The analog signals received from the interface are also processed by the EIUs for the generation of EICAS crew alerting and status messages.

 L. Fire Protection System Interface (Fig. 73)
 (1)  Analog discrete inputs for smoke or fire protection are received by the EIUs as direct analog discrete inputs. This analog data is also processed by the EIUs for the generation of EICAS crew alerting and status formats.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-61-00
 ALL  ú ú 29 Page 88G ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

M7879 R-FLAP CONTROL UNIT (E2-2)
Flap System Interface Figure 70
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-61-00
 ALL  ú
 ú  07  Page 88H
 ú  Jun 10/94 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

M7351 R-EIU
M3137 R-STABILIZER TRIM/RUDDER RATIO
(E2-6)
MODULE (E2-2)
Automatic Stabilizer Trim System Interface
Figure 71
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護(hù)手冊 指示/記錄系統(tǒng) 2(101)