28-42-01
ALL ú ú 03 Page 407 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
~.............................................................................. | COMPONENT | OPERATIONAL TEST PROCEDURE | ................................................................................ |Boost Pump |AMM 28-22-00/501 | ................................................................................ |Override/Jettison Pump |AMM 28-22-00/501 | ................................................................................ |APU Boost Pump |AMM 28-25-00/501 | 2.......................................…......................................1
F. Put the Airplane Back to the Usual Condition
S 414-014
(1) Install the access door, 573AT or 673AT, if you removed it.
S 094-024
WARNING:_______ YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO REMOVE THE
DOOR LOCKS FROM THE LANDING GEAR DOORS. THE DOORS CAN CLOSE
QUICKLY IF YOU DO NOT REMOVE THE DOOR LOCKS CORRECTLY. THIS
CAN CAUSE INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT.
(2)
Do this task: Removal of the Door Locks on the Wing Landing Gear (AMM 32-00-30/201).
S 094-027
(3)
Do this task: Removal of the Door Locks on the Body Landing Gear (AMM 32-00-30/201).
S 094-026
WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO REMOVE THE
_______ LE FLAP SAFETY LOCKS. THE LE FLAPS CAN MOVE QUICKLY IF YOU DO NOT DO THE STEPS CORRECTLY. THIS CAN CAUSE INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT.
(4)
Do this task: Safety Lock Removal and Leading Edge Flap Activation (AMM 27-81-00/201).
S 864-019
(5)
Do this Task: Leading Edge Flap Retraction (AMM 27-81-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-42-01
ALL ú ú 08 Page 408 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
FUEL TEMPERATURE INDICATING SYSTEM - DESCRIPTION AND OPERATION
______________________________________________________________
1. General_______
A. The fuel temperature indicating system measures the temperature of the fuel in the No. 1 main tank and displays the temperature on the main EICAS screen at all times.
B. The system is operational when 28-volt dc power is supplied to the fuel system/EICAS interface card - main (FSEIC) from the 28V DC Bus 3.
2. Fuel Temperature Bulb (Fig. 1)_____________________
A. The fuel temperature bulb consists of a temperature-sensitive element enclosed in a metal case. The bulb is installed in the No. 1 main tank, mounted in an adapter on the rear spar. Resistance of the element varies with fuel temperature.
3. Operation (Fig. 2 and 3)_________
A. Functional Description
(1) When 28-volt dc power is supplied to the FSEIC, the system is operational. The FSEIC sends a signal to the temperature bulb and measures the bulb resistance on the return signal. Resistance value is converted to temperature at the FSEIC and data is sent to EICAS, through a digital data bus. The fuel temperature is displayed on the main EICAS screen.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-43-00
ALL ú ú 01 Page 1 ú Oct 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
SEE B
SEE A
NACELLE STRUT
AFT FIXED FAIRING
A
TEMPERATURE BULB ADAPTER
ELECTRICAL CABLE
FUEL TEMPERATURE
BULB T445
LEFT WING
REAR SPAR
HYDRAULIC ACCESS PANEL NO. 573CB
B
Fuel Temperature Indicating System Component Location
Figure 1
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機維護手冊 燃油 FUEL 4(152)
