曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (c)  Remove and replace the densitometer or repair the wire bundle connections to the densitometer (AMM 28-41-11/401).
 S 815-127
 (15) Turn the DENSITOMETER switch through the positions R1 through R8.
 NOTE: The DENSITY BAD indicator light will come on when the
____ DENSITOMETER switch is in the R1-R8 positions. This does not show that the densitometer is BAD.
 S 815-128
 (16)
 Stop for a short time at each position to see if the R1-R8 GOOD/BAD indicator lights come on.

 S 815-130

 (17)
 Put the DENSITOMETER switch to the OFF position to complete the test.

 S 815-272

 (18)
 Find out if the densitometer system operates correctly:

 (a)  
If the indication is GOOD with the switch in the DENSITY and R1 thru R8 positions at the FQPU M7860, and the densitometer connector at the tank wall, the densitometer system operates correctly.

 (b)  
If the indication is BAD with the switch in the DENSITY or R1 thru R8 positions, there is a problem with the densitometer system. 1) If the densitometer is BAD when you do the test at the FQPU

 M7860, and also BAD at the densitometer connector at the tank wall, the problem is in the fuel tank.
 2)  If the densitometer is BAD at the FQPU M7860, but GOOD at the densitometer connector at the tank wall, the problem is in the densitometer wiring between the densitometer connector at the tank wall and the FQPU M7860.
 (c)  Replace or repair these items to correct the densitometer problem: 1) FQPU, M7860 (AMM 28-41-13/401) 2) Fuel densitometer (AMM 28-41-11/401) 3) Densitometer in-tank wire bundle (AMM 28-41-09/401) 4) Airplane densitometer wire bundle between the FQPU M7860,
 and the densitometer connector at the tank wall (SSM 28-41-03, SSM 28-41-04, SSM 28-41-05, WDM 28-41-21, WDM 28-41-22, WDM 28-41-23, WDM 28-41-24).
 S 085-131
 (19)
 Remove the test equipment.

 S 085-183

 (20)
 Remove the PSD747-21 circuit card adapter from the slot of the applicable IFQC card.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-41-00
 ALL  ú ú 08 Page 539 ú Feb 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 425-184
 CAUTION: YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO INSTALL
_______ THE IFQC CARD. A FAILURE TO TO DO THE STEPS CORRECTLY CAN CAUSE DAMAGE TO THE EQUIPMENT.
 (21)
 Do this task to install the applicable IFQC card in the FQPU M7860, card file: "ESDS Circuit Card Installation" (AMM 20-41-02/201).

 S 415-244

 (22)
 At the FQPU, M7860, tighten the eight captive screws on the access panel assembly.

 S 415-245

 (23)
 Go out of and close the electronics access door (125B).

 S 865-144

 (24)
 Close these circuit breakers and remove the DO-NOT-CLOSE tags:

 (a)  
On the main power distribution panel, P6:
 1) 6D5, FUEL QTY 1
 2) 6D6, FUEL QTY 2

 (b)  
On the DC power distribution panel, P180:
 1) 180M9, FUELING PWR - HOT BAT
 2) 180C25, FUELING LTS PANEL
 3) 180C26, FUELING LTS RECP

 (c)  
On the left power distribution center, P414:

 S 745-145
 (25)
 Do this CMCS ground test:  <FUEL QUANTITY IND (Reference the Fuel Quantity Indicating System Operational Test).

 K.
Put the Airplane Back to the Usual Condition

 S 865-273
 (1)  Remove the electrical power, if it is not necessary
 (AMM 24-22-00/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-41-00
 ALL  ú ú 05 Page 540 ú Feb 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 FUEL QUANTITY TANK UNIT - REMOVAL/INSTALLATION
______________________________________________
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 燃油 FUEL 4(113)