(11)
 AMM 32-00-30/201, Landing Gear Door Locks

 C.
Access

 (1)  
Location Zones
 135 Wing Landing Gear Well, Left
 136 Wing Landing Gear Well, Right
 221 Control Cabin, Left
 222 Control Cabin, Right
 521 Leading Edge to Front Spar, Left
 571 Rear Spar to Landing Gear Support Beam, Left
 671 Rear Spar to Landing Gear Support Beam, Right

 (2)  
Access Panels
 521CB Refuel Control Panel Access Door

 D.
Preconditions

 S 865-261
 (1)  
These conditions are necessary for this task:

 (a)  
Fuel Feed System is serviceable.

 (b)  
Fuel Jettison System serviceable.

 (c)  
A specific fuel quantity is necessary for this task (AMM 12-11-01/301, AMM 28-26-00/201).

 (d)  
Electrical Power On (AMM 24-22-00/201).

 (e)  
Fuel System Card File serviceable (AMM 28-22-16/401).

 (f)  
Integrated Display System (IDS) serviceable (AMM 31-61-00/501).

 (g)  
Airplane must be in the ground mode (AMM 32-09-02/201).

 (h)  
CDU installed (AMM 34-61-02/401).

 (i)  
Central Maintenance Computer (CMC) serviceable (AMM 45-10-00/501).

 E.
Prepare for the Test

 (1)  
Supply the electrical power (AMM 24-22-00/201).

 S 865-210
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-31-00
 ALL  ú ú 16 Page 530 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
 (2)  S 865-211Make sure the airplane is in the ground mode (the airplane is not jacked and the targets are not installed).
 (3)  S 655-180Make sure the fuel tanks contain these fuel quantities: (a) The center wing tank and the No. 2 and 3 reserve tank can contain some quantity of fuel. (b) The No. 1 and 4 main tanks can contain some fuel, but are not completely full (to allow for fuel transfer between tanks). (c) The No. 2 and No. 3 main tanks each contain a minimum of 15,000 lbs (7000 kgs) of fuel (enough to operate the override/jettison pumps in the main tanks).
 (4)  S 655-181If the fuel quantity is not sufficient, refuel the tank(s) (AMM 12-11-01/301), or move fuel from a different tank (AMM 28-26-00/201) if it is necessary.
 (5)  S 865-183Make sure these switches on the fuel management control module, M154, (pilots' overhead panel, P5) are in the off position: (a) Boost pumps and override/jettison pumps (the white ON indication light in each switch does not show). (b) Make sure all the FUEL CONTROL switches on the control stand are set to the CUTOFF position.
 (6)  S 865-250Make sure these switches on the fuel jettison module, (P5 pilots' overhead panel) are in the OFF position. (a) FUEL JETTISON control selector switch.
 WARNING:_______ MAKE SURE THE WHITE ON INDICATION LIGHT IN EACH JETTISON NOZZLE VALVE SWITCH DOES NOT SHOW. A WHITE ON INDICATION LIGHT SHOWS THAT THE NOZZLE VALVES ARE OPEN. IF THE FUEL JETTISON NOZZLE VALVES ARE OPEN, FUEL CAN FLOW FROM THE WING TIPS AT THE JETTISON NOZZLES. A FUEL LEAK CAN CAUSE INJURIES TO PERSONS AND DAMAGE TO EQUIPMENT.
 (b)  FUEL JETTISON L-NOZZLE and NOZZLE-R switches (the white ON indication light in each switch does not show).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-31-00
 ALL  ú ú 10 Page 531 ú Feb 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 865-215
 WARNING:_______ MAKE SURE THESE CIRCUIT BREAKERS ARE OPEN AND DO-NOT-CLOSE TAGS
 ARE ATTACHED.  IF YOU DO NOT OPEN THESE CIRCUIT BREAKERS A FUEL
 LEAK CAN OCCUR.  A FUEL LEAK CAN CAUSE A DANGEROUS CONDITION

 FOR EQUIPMENT AND PERSONS.
 (7)  
Open these circuit breakers and attach DO-NOT-CLOSE tags:

 (a)  
On the main power distribution panel, P6: 1) 6C18, JTSN NOZZLE VLV CONT R 2) 6D18, JTSN NOZZLE VLV CONT L

 S 865-247
 (8)  
Make sure these circuit breakers are closed:
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 燃油 FUEL 4(13)