EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-31
ALL ú ú 01 Page 504 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
B
B
C
DRIVE ROD
SUPPORT FITTING
FWD ADJUSTABLE ROD
D
C
D
FAIRING NO. 2 AND 7
E
C
C
FORWARD
UPPER DOOR
DOOR LINK
LINK
AFT DOOR LINK
DOOR FITTING
SUPPORT
FITTING
FWD C
D
D E
FAIRING NO. 1 AND 8
C
Outboard Flap Track Fairing Adjustment
Figure 501 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-31
ALL ú ú 02 Page 505 ú Feb 10/89
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
LOWER WING SURFACE
Outboard Flap Track Fairing Adjustment
Figure 501 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-31
ALL ú ú 01 Page 506 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
F-F
Outboard Flap Track Fairing Adjustment
Figure 501 (Sheet 4)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-31
ALL ú ú 01 Page 507 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
SEE E
TRANSMISSION
FWD
UPSTOP
UNIVERSAL BALL SCREW
JOINT
DOWNSTOP
SEE F
BALL
E NUT SCREW
0.58 |0.06 INCH
(DIMENSION X)
UNIVERSAL JOINT STOP BALL SCREW NUT
F
Outboard Flap Track Fairing Adjustment
Figure 501 (Sheet 5)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-31
ALL ú ú 02 Page 508 ú Feb 10/89
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
(b)
Make sure that the fixed and movable fairing are aligned in the limits shown on section A-A.
(c)
If the fairings are not aligned in the tolerance, adjust the checknuts on the adjustable rods for the fixed fairing: 1) Tighten the checknuts. 2) Install the lockwire on the checknuts.
(d)
Install the bolts and nuts: 1) Tighten the nuts to 50-70 pound-inches (5.6-7.9 N-m).
S 865-010
(3) Do this task to pressurize hydraulic system No. 4: "Hydraulic System Pressurization" (Ref 29-11-00/201).
S 715-024
CAUTION:_______MONITOR THE FLAP MOVEMENT CAREFULLY. THE FLAPS CAN BE DAMAGED BY INCORRECTLY ADJUSTED COMPONENTS.
(4)
Move the flaps and make sure the fairing moves correctly.
S 835-021
(5)
Adjust the seal and the seal retainer on the flap track fairing:
(a)
Make sure the clearance between the seal retainer and the flap is in the limits shown on Section B-B.
(b)
If the clearance is not in the limits, extend the flaps and adjust the seal.
S 865-020
(6)
Put the flap control lever in the UP detent to retract the flaps.
S 435-013 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 5(59)
