(10)
Release the pressure in hydraulic system No. 4 (Ref 29-11-00/201).
S 864-020
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-30
ALL ú ú 01 Page 404 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
OUTBOARD FOREFLAP CARRIAGE AND TOGGLE - INSPECTION/CHECK
________________________________________________________
1. General_______
A. This procedure contains one task: an inspection of an outboard foreflap carriage and toggle. To do this check you measure the inner or the outer diameters of the rollers and the bolts which attach the foreflap carriage and toggle.
B. You usually do this procedure before you install a carriage and toggle assembly. You must remove the foreflap carriage and toggle to do this procedure.
TASK 27-51-30-206-001
2. Outboard Foreflap Carriage and Toggle Inspection________________________________________________
A. Standard Tools and Equipment
(1)
Micrometer - 0 to 1 inch
(2)
Vernier Caliper
B.
References
(1)
27-51-30/401, Outboard Foreflap Carriage and Toggle
C.
Access
(1)
Location Zone
586 Outboard Flap Foreflap, LH
686 Outboard Flap Foreflap, RH
D.
Procedure
S 026-002
(1)
Remove the foreflap carriage and toggle (Ref 27-51-30/401).
S 226-003
(2)
Examine the carriage rollers and the bolts for worn areas:
(a)
Remove the parts to be examined.
(b)
Measure the parts.
NOTE: Use a micrometer or a vernier caliper.
____
(c) Compare the dimensions you measured, with the permitted dimensions shown in Fig. 601.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-30
ALL ú ú 01 Page 601 ú Oct 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
(d) Replace a roller if it has a flat worn area wider than 0.32 inch (8.1 millimeters).
NOTE: Measure chord-wise along the roller surface.
____
(e)
Replace the parts which are not in the tolerance.
(f)
Install the parts.
S 426-004
(3)
Install the foreflap carriage and toggle (Ref 27-51-30/401).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-30
ALL ú ú 01 Page 602 ú Oct 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
SEE A
FOREFLAP CARRIAGE AND TOGGLE
1
A 2 3
NO. INDEX PART NAME DIM. MAXMIN DESIGN LIMITS DIAMETER DIA CLEAR-ANCE MAXPER-MITTED WEAR DIM. WEAR LIMITS WORN PART REPLACE PART WORN REPAIR INSTR. REPAIR
1 BOLT ROLLER OD ID 0.3735 0.3743 0.3745 0.3750 0.3695 0.3795 0.005 X X
2 ROLLER BOLT OD ID 0.4985 0.4993 0.4995 0.5000 0.4945 0.5045 0.005 X X
3 BOLT ROLLER OD ID 0.3740 0.3743 0.3745 0.3750 0.3695 0.3795 0.005 X X
Outboard Foreflap Carriage and Toggle Wear Limits Figure 601
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-30
ALL ú ú 01 Page 603 ú Oct 10/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 5(47)
