S 424-038

 (6)  
Install the aft roller support:

 (a)  
Apply a layer of the sealant to the surfaces of the support, the shims, and the flap track.

 (b)  
Install the aft roller support on the inboard track:

 1)  Attach the aft roller support with eight bolts (38, 39, 40, and 41), washers (45), and nuts (44). Make sure the shims (42) and washers (47) are in the correct position.

 (c)
Install the aft roller support on the outboard track:

 1)  Attach the aft roller support with eight bolts (38, 39, 40 and 41), radius fillers (43 and 46), washers (45), and nuts (44). Make sure the shims (42) and the washers (47) are in the correct position.

 (d)  
Tighten the nuts (44) to 130-180 pound-inches (15-20 N-m).

 (e)  
Install the cotter pins in the nuts.

 F.  
Do a Check of the Operation of the Flaps

 S 864-039
 (1)  Do this task to pressurize hydraulic system No. 4: "Hydraulic System Pressurization" (AMM 29-11-00/201).
 S 714-100
 WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF THE LE AND TE
_______ FLAPS AND FLAP DRIVE MECHANISMS BEFORE YOU MOVE THE FLAP CONTROL LEVER. WITH HYDRAULIC POWER REMOVED, THE FLAPS WILL MOVE AUTOMATICALLY BY ELECTRICAL POWER WHEN YOU MOVE THE FLAP CONTROL LEVER.
 (2)  
Extend and retract the flaps.

 (a)  
Make sure the flaps move smoothly when the aft roller support engages the geneva cam.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-51-40
 ALL  ú ú 01 Page 420 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 G. Put the Airplane Back to Its Usual Condition
 S 644-041
 (1)  
Do this task to lubricate the aft roller support: "Trailing Edge Flap System Lubrication" (AMM 12-21-20/301).

 S 864-042

 (2)  
Do this task to depressurize hydraulic system No.4: "Hydraulic System Depressurization" (AMM 29-11-00/201).

 TASK 27-51-40-404-043
 10. Upstop Fitting Installation___________________________
 A. Consumable Materials
 (1)  
D00633 Grease - BMS 3-33 (recommended)

 (2)  
D00013 Grease - MIL-G-23827 (alternative)

 B.
Parts ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 401 | 34 |Upstop Support (Track No. 1) | 27-51-40 | 01 | 565 | | | | | | | 645 | | | | | | | 680 | | | |Upstop Support (Track No. 2) | | 03 | 495 | | | | | | | 580 | | | | | | | 615 | | | |Upstop Support (Track No. 7) | | | 495 | | | | | | | 585 | | | | | | | 620 | | | |Upstop Support (Track No. 8) | | 01 | 565 | | | | | | | 650 | | | | | | | 685 | | | 48 |Washer (Track No. 1 and 8) | | 01 | 670 | | | |Washer (Track No. 2 and 7) | | 03 | 605 | | | 49 |Washer (Track No. 1 and 8) | | 01 | 665 | | | |Washer (Track No. 2 and 7) | | 03 | 600 | | | 50 |Bolt (Track No. 1 and 8) | | 01 | 660 | | | |Bolt (Track No. 2 and 7) | | 03 | 595 |

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-51-40
 ALL  ú
 ú  01  Page 421
 ú  Feb 18/01 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | | 58 |Nut (Track No. 1 and 8) | | 01 | 675 | | | |Nut (Track No. 2 and 7) | | 03 | 610 | | | 59 |Bolt (Track No. 1 and 8) | | 01 | 525 | | | |Bolt (Track No. 2 and 7) | | 03 | 460 | | | 60 |Washer (Track No. 1 and 8) | | 01 | 530 | | | |Washer (Track No. 2 and 7) | | 03 | 463 | | | 61 |Lube Fitting (Track No. 1 and 8) | | 01 | 545 | | | |Lube Fitting (Track No. 2 and 7) | | 03 | 475 | | | 62 |Roller (Track No. 1 and 8) | | 01 | 560 | | | |Roller (Track No. 2 and 7) | | 03 | 490 | | | 63 |Spacer (Track No. 1 and 8) | | 01 | 535 | | | |Spacer (Track No. 2 and 7) | | 03 | 465 | | | 64 |Nut (Track No. 1 and 8) | | 01 | 540 | | | |Nut (Track No. 2 and 7) | | 03 | 470 | | | 65 |Bolt | | 01 | 105 | | | 66 |Washer | 27-51-28 | 01 | 115 | 2......…........…...................................…..........….....….........1
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 5(110)