S 014-005
(4)
Remove the applicable access panels:
567BB, 567CB, 567DB, and 567EB from track No. 1
565BB, 565CB, 565DB, and 565EB from track No. 2
665BB, 665CB, 665DB, and 665EB from track No. 7
667BB, 667CB, 667DB, and 667EB from track No. 8.
E.
Remove an Outboard Flap Track Fairing
S 014-006
(1) Remove the fixed fairing (4) from the outboard flap track
(Fig. 401):
NOTE: Access to the hinge bolts for the movable fairing is better
____
with the fixed fairing removed.
(a)
Remove the screw (6), washer (7), and nut (8) to disconnect the bonding jumper (5).
(b)
Remove the two bolts (1) that hold the retainers (2) at the forward attach points.
(c)
Remove the retainers.
(d)
Remove the two tiebolts (3).
(e)
Remove the bolts (13), washers (12) and (11), and nuts (10) from the three adjustable rods (9) at the aft end of the fairing.
NOTE: Hold the fairing in its position.
____
(f)
Remove the bushings (14) from the attach fittings for the three adjustable rods.
(g)
Lower the fixed fairing from the airplane.
S 494-007
(2)
Attach the support equipment to the movable fairing (Fig. 402):
(a)
Attach a bootstrap clamp to the flap track.
NOTE: Follow the instructions on the bootstrap clamp.
____
(b) Attach the two fishpole hoists to the clamp and the handling dolly.
NOTE: Make sure the hoist attach point is correctly engaged
____
in the keyhole slot.
(c) Install the handling dolly on the movable fairing:
1) Use the guide ropes to help you put the dolly in the correct position.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-31
ALL ú ú 01 Page 403 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
FIXED FAIRING
EXTENSION
B-B
THE SEAL MUST TOUCH THE LOWER SURFACE OF THE
WING AND FOLD OUT AFTER YOU INSTALL THE FAIRING
Outboard Fixed Flap Track Fairing Installation
Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-31
ALL ú ú 01 Page 404 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
9. ADJUSTABLE
3 LOCATIONS
C-C
Outboard Fixed Flap Track Fairing Installation
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-31
ALL ú ú 01 Page 405 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
Movable Fairing Installation Tools
Figure 402
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-31
ALL ú ú 01 Page 406 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
2) Attach the aft end and the top of the fairing with the straps.
S 024-008
(3)
Remove the movable fairing from the outboard flap track (Fig. 403):
(a)
Remove the screw (11), washer (12), and nut (13) to disconnect the bonding jumper (10) from the movable fairing (14).
(b)
On fairings No. 1 and 8, disconnect the forward door link (34) from the movable door mechanisms: 1) Remove the bolt (38), washer (39), bushing (37),
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 5(49)
