(d)  
Remove the lockbolt from the retainer nut.

 (e)  
Remove the locknut and the retainer from the retainer nut.

 (f)  
Put a screwdriver blade between the end of the lug on the carriage spindle and the end of the retainer collar antirotation lug (Detail C, Fig. 401).

 NOTE: You must not turn the retainer collar while you loosen
____
 the retainer nut.

 (g)  
Use a main carriage retainer nut wrench to remove the retainer nut from the retainer collar.

 (h)  
Loosen the retainer collar on the carriage.

 (i)  
Move the retainer collar and the retainer nut aft.

 CAUTION: MAKE SURE THAT THE CARRIAGE IS HELD CORRECTLY DURING THE
_______ REMOVAL. THE CARRIAGE WEIGHS APPROXIMATELY 200 POUNDS (90 KG). THE CARRIAGE CAN CAUSE DAMAGE.
 (j)  
Use a bearing removal tool to move the carriage out of the link bearing and the thrust bearing. 1) Remove the retainer collar and the retainer nut while the

 carriage is moved out of the link.

 (k)  
If you will install a new carriage, remove the spacer ring from the carriage.

 NOTE: Keep the spacer ring to install on the replacement
____
 carriage.

 TASK 27-51-28-404-006
 3. Outboard Flap Carriage Installation
___________________________________
 A. Special Tools and Equipment
 (1)  
5ME65B01900 Main Carriage Retainer Nut Wrench

 (2)  
10ME65B01900 Outboard Flaps Bearing Removal Tool

 (3)  
5OHME65B0200 TE Flap Main Carriage Sling

 B.
Consumable Materials

 (1)  
A00247 Sealant - BMS 5-95

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-51-28
 ALL  ú ú 04 Page 405 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (2)  
D00633 Grease - BMS 3-33 (recommended)

 (3)  
D00013 Grease - MIL-G-23827 (alternative)

 C.
References

 (1)  
27-51-04/401, Outboard Flap

 (2)  
27-51-28/601, Outboard Flap Carriage

 (3)  
27-51-31/401, Fairings - Outboard Flap Track

 (4)  
IPC 27-51-04, Fig. 1 (Retainer Nut Area)

 (5)  
IPC 27-51-28, Fig. 1 (Aft Thrust Collar Area)

 D.
Access

 (1)  
Location Zone 567 Outboard Flap Track Fairing, Outboard Flap, LH, (Track No. 1) 565 Inboard Flap Track Fairing, Outboard Flap, LH, (Track No. 2) 665 Inboard Flap Track Fairing, Outboard Flap, RH, (Track No. 7)

 667  Outboard Flap Track Fairing, Outboard Flap, RH, (Track No. 8)

 (2)  
Access Doors

 On track No. 1: 587ET Midflap Outboard Trailing Edge Flap, LH 587FT Midflap Outboard Trailing Edge Flap, LH 587GT Midflap Outboard Trailing Edge Flap, LH 587HT Midflap Outboard Trailing Edge Flap, LH
 On track No. 2: 587AT Midflap Outboard Trailing Edge Flap, LH 587BT Midflap Outboard Trailing Edge Flap, LH 587CT Midflap Outboard Trailing Edge Flap, LH 587DT Midflap Outboard Trailing Edge Flap, LH
 On track No. 7: 687AT Midflap Outboard Trailing Edge Flap, RH 687BT Midflap Outboard Trailing Edge Flap, RH 687CT Midflap Outboard Trailing Edge Flap, RH 687DT Midflap Outboard Trailing Edge Flap, RH
 On track No. 8: 687ET Midflap Outboard Trailing Edge Flap, RH 687FT Midflap Outboard Trailing Edge Flap, RH 687GT Midflap Outboard Trailing Edge Flap, RH 687HT Midflap Outboard Trailing Edge Flap, RH
 E. Prepare for the Installation
 S 224-007
 (1)  If you will install a used flap carriage or bearing, examine them for worn areas (Ref 27-51-28/601).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-51-28
 ALL  ú ú 01 Page 406 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 424-008
 (2) Install the outboard flap carriage (Fig. 401):
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 5(42)