(2)  
SSM 27-51-01, 27-51-02, 27-51-03

 (3)  
WDM 27-51-11, 27-51-21, 27-51-22

 (4)  
BYPASS VALVE LOCK (Inboard) G27037-3 and (Outboard) G27037-2.

 B.
Access

 (1)  
Location Zone 222 Control Cabin, RH 117 Electrical and Electronics Compartment - P414 Left

 Power Distribution Center 118 Electrical and Electronics Compartment - P415 Right Power Distribution Center
 C. Deactivate the Inboard Trailing Edge Flaps
 S 862-073
 (1)  
Do this task to depressurize hydraulic system No. 1: "Hydraulic System Depressurization" (AMM 29-11-00/201).

 S 862-057

 (2)  
Push the ALT FLAPS ARM switch on the pilots' center instrument panel to the ALTN position. Make sure the FLAPS CONTROL EICAS message displays.

 S 862-070

 (3)  
Open these circuit breakers and attach DO-NOT-CLOSE tags:

 (a)  
On the Main Power Distribution Panel, P6:
 1) 6E1, PRI TE FLAP CONT AC
 2) 6E2, PRI TE FLAP CONT DC
 3) 6L20, TE FLAP ELEC CONT INBD

 (b)  
On the Right Power Distribution Center, P415: 1) 415A32, TE FLAP ELEC INBD

 S 422-091
 (4)  
Install Bypass Valve Lock.

 (a)  
Remove the Inboard bypass valve connectors. 1) DM625 (Alternate Inboard Flap Motor connector) 2) DV138 (Inboard Bypass Valve Connector)

 (b)  
Move inboard Bypass Valve manual override Lever to position 1 (bypass position).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-51-00
 ALL  ú ú 02 Page 212 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 CAUTION: THE BYPASS VALVE LOCK AND ALT MOTOR BLANKING PLUGS MUST BE
_______ INSTALLED TOGETHER. IF THE BLANKING PLUGS ARE NOT USED WHEN THE BYPASS LOCK IS ON AND THE FLAP LEVER IS MOVED DAMAGE COULD OCCUR TO EQUIPMENT.
 (c)  
Install Bypass Valve Lock on valve motor/lever assembly and tighten thumbscrew on tool.

 (d)  
Install blanking plugs on Bypass Valve connector and alternate motor connector.

 D.
Deactivate the Outboard Trailing Edge Flaps

 S 862-075
 (1)  
Do this task to depressurize hydraulic system No. 4: "Hydraulic System Depressurization" (AMM 29-11-00/201).

 S 862-058

 (2)  
Push the ALT FLAPS ARM switch on the pilots' center instrument panel to the ALTN position.Make sure FLAPS CONTROL EICAS message displays.

 S 862-074

 (3)  
Open these circuit breakers and attach DO-NOT-CLOSE tags:

 (a)  
On the Main Power Distribution Panel, P6:
 1) 6E1, PRI TE FLAP CONT AC
 2) 6E2, PRI TE FLAP CONT DC
 3) 6L19, TE FLAP ELEC CONT OTBD

 (b)  
On the Right Power Distribution Center, P415: 1) 415M38, TE FLAP ELEC OTBD

 S 422-092
 (4)  
Install Bypass Valve Lock.

 (a)  
Remove the Outboard bypass valve connectors. 1) DM622 (Alternate Outboard Flap Motor connector) 2) DV139 (Outboard Bypass Valve Connector)

 (b)  
Move Outboard Bypass Valve manual override Lever to position 1 (bypass position).

 (c)  
Install Bypass Valve Lock on valve motor/lever assembly and tighten thumbscrew on tool.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-51-00
 ALL  ú ú 01 Page 213 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 CAUTION: THE BYPASS VALVE LOCK AND ALT MOTOR BLANKING PLUGS MUST BE
_______ INSTALLED TOGETHER. IF THE BLANKING PLUGS ARE NOT USED WHEN THE BYPASS LOCK IS ON AND THE FLAP LEVER IS MOVED DAMAGE COULD OCCUR TO EQUIPMENT.
 (d)  Install blanking plugs on Bypass Valve connector and alternate motor connector.
 TASK 27-51-00-442-043
 9. Trailing Edge Flaps Activation
______________________________
 A. References
 (1)  
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 4(55)