27-51-06
 ALL  ú ú 01 Page 606 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L34477
A
747-400 MAINTENANCE MANUAL
 FLAP CONTROL LEVER RVDT ASSEMBLY - REMOVAL/INSTALLATION
_______________________________________________________
 1.  General_______
 A.  There are two tasks in this procedure. There is one task for the removal and one task for the installation of an RVDT assembly for the flap control lever. The procedure has these parts:
 (1)  
A deactivation of the flaps

 (2)  
The removal of the RVDT assembly

 (3)  
The installation of the RVDT assembly

 (4)  
An adjustment of the RVDT assembly

 (5)  
An activation of the flaps.

 TASK 27-51-07-004-001
 2.  Flap Control Lever RVDT Assembly Removal (Fig. 401)________________________________________
 A.  References
 (1)  
AMM 27-51-00/201, Trailing Edge Flap System

 (2)  
AMM 27-81-00/201, Leading Edge Flap System

 (3)  
AIPC 27-51-10, Fig. 5

 B.  
Access

 (1)  
Location Zone
 222 Control Cabin, RH

 C.  
Procedure

 S 864-002
 (1)  
Do this task: "Trailing Edge Flaps Deactivation"
 (AMM 27-51-00/201).

 S 864-003

 (2)  
Do this task: "Leading Edge Flaps Deactivation" (AMM 27-81-00/201).

 S 864-004

 (3)  
Open these circuit breakers and attach DO-NOT-CLOSE tags:

 (a)  
P7, Overhead Circuit Breaker Panel
 1) 7C10, FLT CONT ELEC 2L AC
 2) 7C11, FLT CONT ELEC 2L DC
 3) 7C12, FLT CONT ELEC 1L AC
 4) 7C13, FLT CONT ELEC 1L DC
 5) 7C14, FLT CONT ELEC 1R AC
 6) 7C15, FLT CONT ELEC 1R DC
 7) 7C16, FLT CONT ELEC 2R AC
 8) 7C17, FLT CONT ELEC 2R DC

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-51-07
 ALL  ú ú 03 Page 401 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

SEE A
SEE B
FLAP CONTROL
LEVER
A
ROD
FLAP CONTROL LEVER RVDT ASSEMBLY
CRANK
MOUNTING BOLTS
RIG PIN HOLE
RIG PIN SLOT
ELECTRICAL CONNECTORS B
Flap Control Lever RVDT Assembly Installation Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-51-07
 ALL  ú ú 01 Page 402 ú Apr 10/89
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 864-018
 WARNING: MAKE SURE TO OPEN THE CIRCUIT BREAKERS FOR THE CAPTAIN'S AND
_______ THE FIRST OFFICER'S SEATS BEFORE YOU DO WORK AROUND THEM. A FAILURE TO OPEN THE CIRCUIT BREAKERS CAN CAUSE THE SEATS TO MOVE ACCIDENTALLY. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
 (4)  
Open these circuit breakers and attach DO-NOT-CLOSE tags:

 (a)  
P414, Power Distribution Center - Left 1) 414D8, CAPT PWR SEAT

 (b)  
P415, Power Distribution Center - Right 1) 415H32, F/O PWR SEAT

 S 014-005
 (5)
Remove the cover from the right side of the control stand.

 S 864-006

 (6)  
Put the flap control lever in the 10-unit detent.

 S 024-007

 (7)  
Remove the flap control lever RVDT assembly:

 (a)  
Disconnect the electrical connectors YBEJ16, YBEJ17, and YBEJ18.

 (b)  
Remove the bolt, washer, nut, and bushing which connect the rod to the crank.

 (c)  
Remove the three mounting bolts, nuts, and washers that connect the RVDT assembly to the control stand.

 (d)  
Remove the RVDT assembly.

 TASK 27-51-07-404-008
 3.  Flap Control Lever RVDT Assembly Installation (Fig. 401)_____________________________________________
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 4(127)