(b)
To load the cargo, put the MAIN DRIVE joystick on the master cargo control panel to LOAD.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-57-00
ALL ú ú 04B Page 17 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
(c)
To control the loading operation, put the MAIN DRIVE joystick on the local cargo control panel to LOAD.
(d)
To move the cargo forward or aft, operate the LOCAL DRIVE joystick on the local cargo control panel.
(e)
To unload the cargo, put the MAIN DRIVE joystick on the master cargo control panel to OFF.
WARNING: DO NOT PUT THE MAIN DRIVE JOYSTICK ON THE ADJACENT LOCAL
_______ CARGO CONTROL PANEL TO THE UNLOAD POSITION BEFORE YOU RELEASE THE PALLET OR CONTAINER AT THAT POSITION. IF THE MAIN DRIVE JOYSTICK ON THE ADJACENT LOCAL CARGO CONTROL PANEL IS IN THE UNLOAD POSITION, THE PALLET OR CONTAINER CAN MOVE AND CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(f)
Put the MAIN DRIVE joystick on the local cargo control panel to UNLOAD.
(g)
Put the MAIN DRIVE joystick on the master cargo control panel to UNLOAD.
(h)
Put the MAIN DRIVE joystick on the local cargo control panel to OFF.
(3) Operate System (Nose Cargo Door) (P1A, P2A, P2B)
(a)
Make sure both forward guide rails are in the up position.
(b)
On the master cargo control panel, do the steps that follow: 1) Push SYSTEM POWER ON to start the system. 2) Push the ON switch on the AUX SELECT.
(c)
To load the cargo, on the auxiliary cargo control panel, do the steps that follow: 1) Push the LOAD/UNLOAD button to LOAD. 2) Push the SCD/NOSE button to NOSE. 3) Set one of the PALLET/CONTAINER POSITION buttons to ON. 4) Push the SEQUENCE buttons to load the cargo.
(d)
To load the cargo, hold the joystick on the auxiliary cargo control panel in the STEER/DRIVE position, at the same time put the command switch on the applicable local cargo control panel in the STEER/DRIVE position.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-57-00
ALL ú ú 04B Page 18 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
(4)
A
747-400
MAINTENANCE MANUAL
(e)
To unload the cargo, on the auxiliary cargo control panel, do the steps that follow: 1) Push the LOAD/UNLOAD button to UNLOAD. 2) Set one of the PALLET/CONTAINER POSITION buttons to ON. 3) Push the SEQUENCE buttons to start unload the cargo.
(f)
To unload the cargo, hold the joystick on the auxiliary cargo control panel in the STEER/DRIVE position, at the same time hold the command switch on the applicable local cargo control panel in the STEER/DRIVE position.
Operate System (Side Cargo Door)
(a)
On the master cargo control panel, do the steps that follow: 1) Push SYSTEM POWER ON to start the system. 2) Push the OFF switch on the AUX SELECT 3) Push LEFT or RIGHT side selector. 4) Push the applicable zone select switch.
(b)
On the side door cargo control panel, do the steps that follow: 1) Push SYSTEM POWER ON switch to start the system. 2) Push LEFT and RIGHT ENTRY DRIVE UNITS ON/OFF and
NORMAL/RETRACT switches to ON and NORMAL positions, respectively.
(c)
To load the cargo, put the DRIVE CONTROL joystick on the side door cargo control panel to IN.
NOTE: You can use the remote cargo control panel to move
____ cargo laterally into the side door cargo transfer area also. On the side door cargo control panel, push REMOTE CONTROL ON/OFF switch to ON position to activate remote cargo control panel, then at remote cargo control panel, push LEFT ENTRY DRIVE UNITS ON/OFF switch to ON position and hold DRIVE CONTROL switch to IN position. Use of the remote cargo control panel is optional.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 EQUIPMENT/FURNISHINGS 2(46)
