C. Procedure
 S 424-007
 (1)  
Hold the limit switch assembly in its position on the structure while you install the screws.

 S 434-008

 (2)  
Connect the electrical connector plug.

 S 414-009

 (3)  
Install the steerable PDU which you removed to get access to the limit switch assembly (AMM 25-57-01/401).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-57-15
 ALL  ú ú 07A Page 405 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 MAIN DECK CARGO RESTRAINING SYSTEM - DESCRIPTION AND OPERATION
______________________________________________________________
 1.  General_______
 A.  The main deck cargo restraining system consists of retractable guides, restraints, locks and stops which guide and secure containerized and palletized cargo units against lateral, longitudinal and vertical loads. The main deck cargo restraining system is shown in Fig. 1.
 B.  The main deck cargo modules are loaded in the airplane through the nose cargo door and the side cargo door.
 C.  The cargo units are propelled and steered by powered drive wheels over a surface of casters and rollers and then guided and restrained into parking positions in a double row along the main deck compartment.
 D.  The main deck compartment can accomodate 8 and 10 foot high cargo units measuring 96x238.5 (20 foot), 96x125, 88x125, 96x117.75 (10 foot), and/or 88x108-inches in length. Manual extension and retraction of the cargo restraining equipment is required for locking and unlocking of the cargo units.
 E.  The nose cargo area has two different loading and unloading
 configuration:

 (1)  
The standard configuration can accommodate three cargo units P1A, P2A, and P2B. P1A and P2A units have dimensions of 96 in x 125 in x 8 ft contoured pallets, P2B unit has dimension of 96 in x 125 in x 8 ft pallet.

 (2)  
The alternate configuraion can accommodate two cargo units P1 and P2. The units have dimensions of 96 in x 125 in x 8 Ft pallets.

 (3)  
The units P1A and P2A have to be in the special contours size when loaded and unloaded through the nose cargo door.

 (4)  
The unit P2A can be a full size container when loaded and unloaded through the side cargo door.

 F.  The main deck cargo restraining system consists of the following
 components and are located as shown in Fig. 1:

 (1)  
Forward retractable guide rails

 (2)  
Guide/restraint rails

 (3)  
Park rails

 (4)  
Directional guide rail

 (5)  
Restraint/caster units

 (6)  
Outboard guide/restraint rails

 (7)  
Retractable side door guide/restraint rails

 (8)  
Retractable side door rollout guide/stops

 (9)  
Side door sill roller/caster and guide assembly

 (10)
 Retractable center guide/restraints

 (11)
 Retractable centerline bumper

 (12)
 Lock/stop roller-caster trays

 (13)
 Retractable end locks

 (14)
 Fixed end stops

 (15)
 Transition guide rail and stowage support

 (16)
 Forward lock trays

 (17)
 Aft stop trays

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-58-00
 ALL  ú ú 02B Page 1 ú Feb 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 G.  The P29th pallet position cargo restraining hardware control the guidance and positioning of a single 88x108, 96x117.75, 88 or 96x125-inch wide cargo unit along the right side in the aft end of the cargo compartment.
 H.  A cargo barrier net is above the main deck ceiling panel and is to give protection to the upper deck occupants and to restrain the cargo units from moving forward due to possible cargo unit shifting.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 EQUIPMENT/FURNISHINGS 2(100)