曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 NOTE: Do not modify the rack tang, the support plate
____ dowels, or the gear fork in the fuel control box. The fuel control box is designed to agree with the airplane model and engine type. The table is given as information because of the engine intermix configurations and spare engine interchanges between airplanes.
 ~.................................................................... | AIRPLANE MODEL | ENGINE TYPE | FUEL CONTROL BOX | ...................................................................... | 737-300 | CFM56-3B | 315A1040-4, -5, -6 | | | CFM56-3C | 315A1040-7 | ...................................................................... | 737-400 | CFM56-3B | 315A1040-8 | | | CFM56-3C | 315A1040-9 | ...................................................................... | 737-500 | CFM56-3B | 315A1040-10 | | | CFM56-3C | 315A1040-11 | 2..................…...................….............................1
 (f) Engine fire protection system
 1)  Refer to SB 737-26-1072 if it is necessary to use an engine with the Systron Donner fire/overheat detection system on an airplane with the Kidde fire/overheat detection system.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 71-00-02
 ALL  ú ú C14B Page 472 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
Prepare For the Installation of the Power Plant
_______________________________________________
 (g) CTAI clamp and pre-cooler valve orientation
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 71-00-02
 ALL  ú ú C10B Page 473 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
Power Plant Installation - Bootstrap Method
___________________________________________
 TASK 71-00-02-404-055-C00
 5.  Power Plant Installation - Bootstrap Method___________________________________________
 A.  General
 (1)  
This procedure has two topics as follows:

 (a)  
The first topic prepares the engine for the installation.

 1)  When you install an engine, you must make sure the configuration of the engine is equivalent to that of the airplane.
 2)  To help you install the engine more quickly, use the steps and table found in the front of this procedure.
 (b)  
The second topic installs the engine on the strut with the strut-mounted bootstrap equipment.

 B.  
Equipment

 (1)  
Bootstrap Equipment - C71003

 (2)  
Cradle - C71008
 AGSE International, Inc.,
 3270 East 70th Street, Long Beach, CA
 90805 (P/N AM-1802); or

 Stanley Aviation,
 2501 Dallas Street, Aurora, CO 80010
 (P/N 110702)

 (3)  
Transportation Base - C71008
 AGSE International, Inc. (P/N AM-1803); or
 Stanley Aviation (P/N 110701)

 (4)  
Wrench, Aft Cone Bolt Nut - C71019-1

 (5)  
Adapter Wrench, Aft Cone Bolt Nut - C71001
 or C71014

 

 NOTE: Adapter Wrench C71001 is equipped with a
____ reversing ratchet feature and is suitable for run-on and tightening of aft cone bolt nut; adapter wrench C71014 is recommended for tightening only.
 (6)  Alignment Guide Tool - Cone Bolt, Forward
 Engine Mount - C71018

 NOTE: Alignment guide tool is only required
____ for engine installation on engines with vibration isolators for the forward mount/thrust reverser hinges.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 71-00-02
 ALL  ú ú C12B Page 474 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 動力裝置 POWER PLANT 1(130)