(a)  
Make sure the right green LED comes on.

 (b)  
Push and hold the SKID button down and make sure these conditions occur: 1) The right green LED goes off 2) The left green LED comes on momentarily. 3) The center green LED comes on.

 (c)  
Release the SKID button and make sure the right green LED comes on.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-42-00
 ALL  ú ú 01 Page 506 ú Jul 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 735-032
 (4)  
Put the selector switch to the L ALT and the R ALT positions and do the three steps that follow at the two positions.

 (a)  
Make sure the center green LED comes on.

 (b)  
Push and hold the SKID button, and make sure the center green LED comes on.

 (c)  
Release the SKID button.

 (d)  
Make sure the right green LED comes on.

 (e)  
After 12 to 18 seconds make sure the right green LED goes off and the center green LED comes on.

 S 735-033
 (5)  
Release the AIR and the NOSE SENSE test switches on the E-11 and the VALVE button on the anti-skid module.

 G.
Transducer Test

 S 845-034
 (1)
Remove the pressure from hydraulic system B (AMM 29-15-00/201).

 S 735-035

 (2)  
Push the XDCR button during the transducer test.

 S 735-036

 (3)
Put the selector switch to the LO, LI, RI and the RO positions.

 (a)  
Make sure the right green LED comes on at each selector switch position.

 S 735-037
 (4)  
Release the XDCR button.

 H.
Locked Wheel Protection Test

 S 845-038
 (1)  
Pressurize hydraulic system B (AMM 29-15-00/201).

 S 735-039

 (2)  
Press and hold the VALVE button and the LW button during the locked wheel protection test.

 S 735-040

 (3)  
Put the selector switch to the LO, LI, RI, and the RO positions.and check for right green LED at each position.

 (a)  
Make sure the right green LED comes on for each selector switch position.

 S 735-087
 (4)  
Put the selector switch to the L ALT and the R ALT positions.

 (a)  
Make sure the center green LED comes on at each selector switch position.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-42-00
 ALL  ú ú 01 Page 507 ú Jul 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 735-041
 (5)  
Release the VALVE and the LW buttons.

 I.
Squat Delay Test

 S 735-042
 (1)
Push and hold the VALVE button during the squat delay test.

 S 735-043

 (2)  
Put the selector switch to the RI position.

 (a)  
Push the AIR SENSE test switch on the E-11 and make sure the right green LED comes on.

 (b)  
Release the AIR SENSE test switch and make sure the right green LED comes on.

 (c)  
After 3 to 4 seconds make sure the right green LED goes off and the center green LED comes on.

 S 735-044
 (3)  
Put the selector switch to the RO position.

 (a)  
Push the NOSE and the GRD sense test switch on the E-11 and make sure the right green LED comes on.

 (b)  
Release the NOSE and the GROUND sense test switches. 1) Make sure the right green LED comes on. 2) After 3 or 4 seconds make sure the right green LED goes off

 and the center green LED comes on.
 TASK 32-42-00-705-045
 4.  Antiskid and Alternate Antiskid Valve and Brake Function Test_____________________________________________________________
 A. References
 (1)  
AMM 24-22-00/201, Manual Control

 (2)  
AMM 29-15-00/201, Hydraulic Systems
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機(jī)維護(hù)手冊 起落架 LANDING GEAR 3(55)