S 735-015

 (6)  
Put the selector switch to the R ALT position.

 S 735-016

 (7)  
Make sure the center green LED comes on.

 S 735-017

 (8)  
Release the VALVE button.

 D.
Touchdown Protection Test

 S 735-018
 (1)  
Push and hold the NOSE sense test switch on the front of the E-11 shelf in the radar bay.

 (a)  
Push and hold the VALVE button on the anti-skid module.

 (b)  
Move the selector switch to the R ALT, L ALT, LI, and RI positions. 1) Make sure the center green LED comes on at each position.

 (c)  
Move the selector switch to the LO and RO positions.

 (d)  
Make sure the right green LED comes on.

 S 735-019
 (2)  
Release the NOSE sense switch.

 S 735-020

 (3)  
Push and hold the AIR SENSE test switch on the E-11.

 S 735-021

 (4)  
Push and hold the VALVE button on the anti-skid module.

 (a)  
Put the selector switch to the LO position.

 (b)  
Make sure the center green LED comes on.

 (c)  
Put the selector switch to the LI and RI positions.

 (d)  
Make sure the right green LED comes on for each position.

 (e)  
Put the selector switch to the RO position.

 (f)  
Make sure the center green LED comes on.

 (g)  
Put the selector switch to the L ALT and R ALT positions.

 (h)  
Make sure the center green LED comes on for each position.

 (i)  
Release the AIR SENSE switch on the E-11 and the VALVE button.

 E.
Skid Protection Test

 S 735-022
 (1)  
Push and hold the VALVE button on the anti-skid module for all of the skid protection test.

 S 735-023

 (2)  
Put the selector switch to the R ALT position.

 (a)  
Make sure the center green LED comes on.

 (b)  
Push and hold the SKID button.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-42-00
 ALL  ú ú 01 Page 505 ú Jul 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (c)  
Make sure the center green LED comes on.

 (d)  
Release the SKID button.

 (e)  
Make sure the right green LED comes on.

 (f)  
After 12 to 18 seconds make sure the right green LED goes off and the center green LED comes on.

 S 735-024
 (3)  
Put the selector switch to the L ALT position.

 (a)  
Make sure the center or the left green LED comes on.

 (b)  
Push and hold the SKID button.

 (c)  
Make sure the center green or the left green LED comes on and then changes to the center green LED.

 (d)  
Release the SKID button.

 (e)  
Make sure the right green LED comes on.

 (f)  
After 12 to 18 seconds make sure the right green LED goes off and the center green or the left green LED comes on.

 S 735-025
 (4)  
Put the selector switch to the RO, RI, LI and LO position and do the steps that follow at each position:

 (a)  
Make sure the center green LED comes on.

 (b)  
Push and hold the SKID button.

 (c)  
Make sure the left green LED comes on and then changes to the center green LED.

 (d)  
Release the SKID button.

 (e)  
Make sure the right green LED comes on.

 (f)  
After 12 to 18 seconds make sure the right green LED goes off and the center green LED comes on.

 F.
Spin-up Override Test

 S 735-029
 (1)  
Push and hold the AIR sense and the NOSE sense test switches on the E-11 shelf for the steps that follow:

 S 735-030

 (2)  
Push and hold the VALVE button on the anti-skid module for all the steps in the spin-up override test.

 S 735-031

 (3)  
Put the selector switch to the LO, LI, RI and the RO positions and do the three steps that follow at each position.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 起落架 LANDING GEAR 3(54)