31-24-12
 ALL  ú ú 02 Page 401 ú Mar 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 B. Access
 (1)  Location Zone
 101 Control Cabin - Left
 102 Control Cabin - Right

 C. Procedure
 S 864-007
 (1)  Make sure these circuit breakers are open:
 (a)  
P6-1 Panel
 1) MACH WARN SYS-2

 (b)  
P18-2 Panel
 1) MACH WARN SYS-1
 2) FLIGHT RECORDER AC
 3) FLIGHT RECORDER DC

 S 434-008
 (2)  
Connect the electrical connectors to the rear of the test module.

 S 424-009

 (3)  
Put the test module into the aft overhead panel, P5.

 S 434-010

 (4)
Tighten the four quick-release fasteners on the test module.

 S 864-011

 (5)  
Supply electrical power (Ref 24-22-00/201).

 S 864-012

 (6)  
Close these circuit breakers:

 (a)  
P6-1 Panel
 1) MACH WARN SYS-2

 (b)  
P18-2 Panel
 1) MACH WARN SYS-1
 2) FLIGHT RECORDER AC
 3) FLIGHT RECORDER DC

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-24-12
 ALL  ú ú 01 Page 402 ú Mar 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 714-013
 (7)  Do this test of the test module:
 (a)  
Make sure the flight data recorder OFF light (OFF light) is on.

 (b)  
Put the flight data recorder TEST--NORMAL switch in the TEST position.

 (c)  
Make sure the OFF light is off.

 (d)  
Put the TEST--NORMAL switch in the NORMAL position.

 (e)  
Make sure the OFF light is on.

 S 714-016
 (8)  Do this operational test of the mach airspeed warning test module:
 (a)  
Make sure these circuit breakers are closed:

 1)  P18 and P6 Panels
 a) MACH WARN SYS 1
 b) MACH WARN SYS 2

 (b)  
Push the MACH AIRSPEED WARNING TEST NO 1 switch on the P5 panel. 1) Make sure you hear the warning clacker.

 (c)  
Release the MACH AIRSPEED WARNING TEST NO 1 switch on the P5 panel. 1) Make sure the warning clacker is off.

 (d)  
Push the MACH AIRSPEED WARNING TEST NO 2 switch on the P5 panel. 1) Make sure you hear the warning clacker.

 (e)  
Release the MACH AIRSPEED WARNING TEST NO 2 switch on the P5 panel. 1) Make sure the warning clacker is off.

 S 864-015
 (9)  Remove the electrical power if it is not necessary (Ref 24-22-00/201).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-24-12
 ALL  ú ú 01 Page 403 ú Mar 15/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
 1.

2.

3.

ú
A
737-300/400/500MAINTENANCE MANUAL
 FLIGHT DATA ACQUISITION UNIT - REMOVAL/INSTALLATION
___________________________________________________
General
_______
 A.  There are two tasks in this procedure. There is one task for the removal and one task for the installation of the flight data acquisition unit. The FDAU is also refered to as the flight data management unit (FDMU) or the flight data acquisition and management unit (DFDAMU).
 B.  The FDAU is in the main equipment center on shelf E2.
 TASK 31-24-22-004-001Flight Data Acquisition Unit Removal
____________________________________
 A.  References
 (1)  
AMM 20-10-07/201, Electrical/Electronic Black Box

 (2)  
AMM 24-22-00/201, Manual Control

 B.  Access
 (1)  Location Zone
 205 Electronic Compartment

 C.  Procedure
 S 864-002
 (1)  Open these circuit breakers:
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機(jī)維護(hù)手冊 儀表 INSTRUMENTS(90)