(c)  
Put the A/P engage switch A to the CMD position.

 (d)  
Make sure the BIT 2 light on the portable tester is off.

 (e)  
Pull the control column aft until the stabilizer trim operates (AMM 27-41-00/501).

 (f)  
Make sure the BIT 2 light on the portable tester comes on.

 (g)  
Put the control column in the neutral position.

 (h)  
Make sure the BIT 2 light on the portable tester goes out.

 (i)  
Push the control column forward until the stabilizer trim operates.

 (j)  
Make sure the BIT 1 light on the portable tester comes on.

 (k)  
Put the control column in the neutral position.

 (l)  
Make sure the BIT 1 light on the portable tester goes out.

 S 865-690
 (3)  If you will do no more tests, then do this task:
 "Put the Airplane to its Usual Condition."

 TASK 31-24-02-735-201
 48. Stab Trim Switch Signal Test____________________________
 A. Access
 (1)  Location Zones
 101 Control Cabin - Left
 102 Control Cabin - Right

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù.
 BEJ 101-112, 114-999; ú  31-24-02
 ú ú 14 Page 560 ú Mar 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 B. Procedure
 S 865-202
 (1)
Make sure you did the Prepare For Input Parameter Test task.

 S 735-203

 (2)  
Do this test of the signals from the stab trim switch:

 (a)  
Set the portable tester to SUBRAME 0, WORD 8.

 (b)  
Make sure the trim switches on the control wheel are in the neutral position.

 (c)  
Make sure the BIT 2 light on the portable tester is off.

 (d)  
Set the trim switch on the captain's control wheel to the TRIM NOSE UP position.

 (e)  
Make sure the BIT 2 light on the portable tester is on.

 (f)  
Set the trim switch on the captain's control wheel to the neutral position.

 (g)  
Make sure the BIT 2 light on the portable tester goes out.

 (h)  
Set the trim switch on the captain's control wheel to the TRIM NOSE DN position.

 (i)  
Make sure the BIT 1 light on the portable tester is on.

 (j)  
Set the trim switch on the captain's control wheel to the neutral position.

 (k)  
Make sure the BIT 1 light on the portable tester goes out.

 S 735-204
 (3)  
Do the test again on the first officer's control wheel.

 S 865-205

 (4)  
If you will do no more tests, then do this task:
 "Put the Airplane to its Usual Condition."

 TASK 31-24-02-735-470
 49. Stick Shaker Signals Test_________________________
 A. Access
 (1)  Location Zones
 101 Control Cabin - Left
 102 Control Cabin - Right

 B. Procedure
 S 865-722
 (1)
Make sure you did the Prepare For Input Parameter Test task.

 S 735-123

 (2)  
Do this test of the stick shaker signals:

 (a) Set the portable tester to SUBFRAME 0, WORD 28.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù.
 BEJ 101-112, 114-999; ú  31-24-02
 ú ú 15 Page 561 ú Mar 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (b)  
Make sure the BIT 2 light on the portable tester is off.

 (c)  
Push the STALL WARNING TEST NO. 1 button on the stall warning module.

 (d)  
Make sure the BIT 2 light on the portable tester comes on.

 (e)  
Release the STALL WARNING TEST NO. 1 button.

 (f)  
Make sure the BIT 2 light on the portable tester is off.

 (g)  
Push the STALL WARNING TEST NO. 2 button.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 儀表 INSTRUMENTS(82)