R - replace the ADIRU-1 (1FP1) (Ref. AMM TASK 34-12-34-000-001) and (Ref. AMM TASK 34-12-34-400-001).
(1) If the fault continues:
- replace the DMC-1 (1WT1) (Ref. AMM TASK 31-63-34-000-001) and (Ref. AMM TASK 31-63-34-400-001).
(a) If the fault continues:
- do a check and repair the wiring between the ADIRU1 (1FP1) and the DMC1 (1WT1). (Ref. ASM 34-14/01)
B. Do the test given in para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 301-399, 401-499, ∞∞34-14-00∞∞∞∞∞∞∞∞∞∞Page B222
Aug 01/05 CES 1. Possible Causes
Loss of the IR 1 Data Identified by the DMC 3 _______________
- ADIRU-1 (1FP1)
- DMC-3 (1WT3)
- wiring
2. Job Set-up Information______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 31-63-34-000-001
AMM 31-63-34-400-001
AMM 34-12-34-000-001
AMM 34-12-34-400-001
AMM 34-14-00-740-001
ASM 34-14/01
3. Fault Confirmation
__________________
A. Test
Removal of the DMC (1WT1,1WT2,1WT3)Installation of the DMC (1WT1,1WT2,1WT3)Removal of the ADIRU (1FP1, 1FP2, 1FP3)Installation of the ADIRU (1FP1, 1FP2, 1FP3)Interface Test of the IR
R Do the interface test of the IR (system 1) (Ref. AMM TASK 34-14-00-740-001).
4. Fault Isolation
_______________
A. If the test gives the maintenance message
ADIRU1 (1FP1)/DMC3 (1WT3):
R - replace the ADIRU-1 (1FP1) (Ref. AMM TASK 34-12-34-000-001) and (Ref. AMM TASK 34-12-34-400-001).
(1) If the fault continues:
- replace the DMC-3 (1WT3) (Ref. AMM TASK 31-63-34-000-001) and (Ref. AMM TASK 31-63-34-400-001).
(a) If the fault continues:
- do a check and repair the wiring between the ADIRU1 (1FP1) and the DMC3 (1WT1). (Ref. ASM 34-14/01)
B. Do the test given in para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 301-399, 401-499, ∞∞34-14-00∞∞∞∞∞∞∞∞∞∞Page B223
Aug 01/05 CES 1. Possible Causes
Loss of the IR 2 Data Identified by the DMC 2 _______________
- ADIRU-2 (1FP2)
- DMC-2 (1WT2)
- wiring
2. Job Set-up Information______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 31-63-34-000-001
AMM 31-63-34-400-001
AMM 34-12-34-000-001
AMM 34-12-34-400-001
AMM 34-14-00-740-001
ASM 34-14/01
3. Fault Confirmation
__________________
A. Test
Removal of the DMC (1WT1,1WT2,1WT3)Installation of the DMC (1WT1,1WT2,1WT3)Removal of the ADIRU (1FP1, 1FP2, 1FP3)Installation of the ADIRU (1FP1, 1FP2, 1FP3)Interface Test of the IR
R Do the interface test of the IR (system 2) (Ref. AMM TASK 34-14-00-740-001).
4. Fault Isolation
_______________
A. If the test gives the maintenance message
ADIRU2 (1FP2)/DMC2 (1WT2):
R - replace the ADIRU-2 (1FP2) (Ref. AMM TASK 34-12-34-000-001) and (Ref. AMM TASK 34-12-34-400-001).
(1) If the fault continues:
- replace the DMC-2 (1WT2) (Ref. AMM TASK 31-63-34-000-001) and (Ref. AMM TASK 31-63-34-400-001).
(a) If the fault continues:
- do a check and repair the wiring between the ADIRU2 (1FP2) and the DMC2 (1WT2). (Ref. ASM 34-14/01)
B. Do the test given in para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 301-399, 401-499, ∞∞34-14-00∞∞∞∞∞∞∞∞∞∞Page B224
Aug 01/05 CES Loss of the IR 2 Data Identified by the DMC 3
1. Possible Causes
_______________
- ADIRU-2 (1FP2)
- DMC-3 (1WT3)
- wiring
中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 導航 NAVIGATION 2(89)
