(b) If after the second check, the radial position error value is in AREA 2 or 3, replace the defective ADIRU (Ref. AMM TASK 34-12-34-000-001) and (Ref. AMM TASK 34-12-34-400-001).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-14-00∞∞∞∞∞∞∞∞∞∞Page A273
May 01/05R
CES
TASK 34-14-00-810-927
Residual Ground Speed Out of Limit on the CAPT ND
1. Possible Causes
_______________ R - ADIRU1 or ADIRU3
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 34-12-34-000-001 Removal of the ADIRU (1FP1, 1FP2, 1FP3)
AMM 34-12-34-400-001 Installation of the ADIRU (1FP1, 1FP2, 1FP3)
3. Fault Confirmation
__________________
A. At the end of the flight, do a check of the residual ground speed:
(1) On the CAPT ND:
- to read the residual ground speed related to the IR3: . set the ATT HDG selector switch to CAPT/3.
(2) On the ADIRS CDU:
- set the DATA DISPLAY selector switch to TK/GS
- set the SYS DISPLAY selector switch to 1 (IR1) or 3 (IR3)
- read the related ground speed in the CDU display.
NOTE : The radial position error does not stay in the memory of the
____ MCDU after the aircraft electrical circuits are de-energized.
4. Fault Isolation
_______________
A. Compare the ground speed values that you read with these limits:
(1) If the residual ground speed value is lower than or equal to 14 kts, no maintenance action is necessary.
(2) If the residual ground speed value is equal to or greater than 21 R kts, replace the ADIRU1 or ADIRU3 (Ref. AMM TASK 34-12-34-000-001) R and (Ref. AMM TASK 34-12-34-400-001).
(3) If the residual ground speed is between 15 and 20 kts, you must do a check of this value after the subsequent flight:
(a) If after the second check, the residual ground speed is lower than or equal to 14 kts, no maintenance action is necessary.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : ALL ∞∞34-14-00∞∞∞∞∞∞∞∞∞∞Page A274
May 01/05 CES
(b) If after the second check, the residual ground speed is 15 kts or R more, replace the ADIRU1 or ADIRU3 (Ref. AMM TASK 34-12-34-000-R 001) and (Ref. AMM TASK 34-12-34-400-001).
Residual Ground Speed Out of Limit on the F/O ND
_______________
1. Possible Causes
2. Job Set-up Information
R - ADIRU2 or ADIRU3 ______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 34-12-34-000-001 Removal of the ADIRU (1FP1, 1FP2, 1FP3)
AMM 34-12-34-400-001 Installation of the ADIRU (1FP1, 1FP2, 1FP3)
3. Fault Confirmation
__________________
A. At the end of the flight, do a check of the residual ground speed:
(1) On the F/O ND:
- to read the residual ground speed related to the IR3: . set the ATT HDG selector switch to CAPT/3.
(2) On the ADIRS CDU:
- set the DATA DISPLAY selector switch to TK/GS
- set the SYS DISPLAY selector switch to 2 (IR2) or 3 (IR3)
- read the related ground speed in the CDU display.
NOTE : The radial position error does not stay in the memory of the
____ MCDU after the aircraft electrical circuits are de-energized.
4. Fault Isolation
_______________
A. Compare the ground speed values that you read with these limits:
(1) If the residual ground speed value is lower than or equal to 14 kts, no maintenance action is necessary.
(2) If the residual ground speed value is equal to or greater than 21 R kts, replace the ADIRU2 or ADIRU3 (Ref. AMM TASK 34-12-34-000-001) R and (Ref. AMM TASK 34-12-34-400-001).
(3) If the residual ground speed is between 15 and 20 kts, you must do a check of this value after the subsequent flight:
(a) If after the second check, the residual ground speed is lower than or equal to 14 kts, no maintenance action is necessary.
中國(guó)航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊(cè) 導(dǎo)航 NAVIGATION 2(75)
