(2) If there is a short to ground at pin AB/15D:
- replace the LGCIU-1 (5GA1) (Ref. AMM TASK 32-31-71-000-001) and (Ref. AMM TASK 32-31-71-400-001).
(a) If there is a short to ground at pin AB/15D:
- do a check and repair the wiring from the ILS receiver 1 (2RT1) to the LGCIU1(5GA1): pin AB/15D to pin AB/6D (Ref. ASM 34-36/01).
(3) If there is a short to ground at pin AB/1C:
- replace the FMGC-1 (1CA1) (Ref. AMM TASK 22-83-34-000-001) and (Ref. AMM TASK 22-83-34-400-001).
(a) If there is a short to ground at pin AB/1C:
- do a check and repair the wiring from the ILS receiver 1 (2RT1) to the FMGC1(1CA1): pin AB/1C to pin AB/9A (Ref. ASM 34-36/01).
B. Do the test given in Para. 3.
ILS2 Test cannot be started
1. Possible Causes
_______________
- RECEIVER-ILS, 2 (2RT2)
- LGCIU-2 (5GA2)
- FMGC-2 (1CA2)
- wiring from the ILS receiver 2 (2RT2) to the LGCIU2(5GA2)
- wiring from the ILS receiver 2 (2RT2) to the FMGC2(1CA2)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 22-83-34-000-001 Removal of the FMGC (1CA1,1CA2)
AMM 22-83-34-400-001 Installation of the FMGC (1CA1,1CA2)
AMM 32-31-71-000-001 Removal of the LGCIU (5GA1, 5GA2)
AMM 32-31-71-400-001 Installation of the LGCIU (5GA1, 5GA2)
AMM 34-36-00-740-002 BITE Test of the ILS
AMM 34-36-31-000-001 Removal of the ILS Receiver (2RT1,2RT2)
AMM 34-36-31-400-001 Installation of the ILS Receiver (2RT1,2RT2)
ASM 34-36/01
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the ILS (system 2) (Ref. AMM TASK 34-36-00-740-002).
4. Fault Isolation
_______________
A. If the test gives the maintenance message LGCIU2(5GA2)/FMGEC2(1CA2)/ILS2 (2RT2):
- do a check for a short to ground at pins AB/15D, 1C of the
RECEIVER-ILS, 2 (2RT2) (Ref. ASM 34-36/01).
(1) If there is no short to ground:
- replace the RECEIVER-ILS, 2 (2RT2) (Ref. AMM TASK 34-36-31-000-001) and (Ref. AMM TASK 34-36-31-400-001).
(2) If there is a short to ground at pin AB/15D:
- replace the LGCIU-2 (5GA2) (Ref. AMM TASK 32-31-71-000-001) and (Ref. AMM TASK 32-31-71-400-001).
(a) If there is a short to ground at pin AB/15D:
- do a check and repair the wiring from the ILS receiver 2 (2RT2) to the LGCIU2(5GA2): pin AB/15D to pin AB/8H (Ref. ASM 34-36/01).
(3) If there is a short to ground at pin AB/1C:
- replace the FMGC-2 (1CA2) (Ref. AMM TASK 22-83-34-000-001) and (Ref. AMM TASK 22-83-34-400-001).
(a) If there is a short to ground at pin AB/1C:
- do a check and repair the wiring from the ILS receiver 2 (2RT2) to the FMGC2(1CA2): pin AB/1C to pin AB/9A (Ref. ASM 34-36/01).
B. Do the test given in Para. 3.
TASK 34-36-00-810-834
Loss of the ILS1 Test Display
1. Possible Causes
_______________
- DMC-1 (1WT1)
- RECEIVER-ILS, 1 (2RT1)
- MMR-1 (40RT1)
- wiring from the ILS receiver 1 to the DMC1
- wiring from the MMR1 to the DMC1
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 31-63-34-000-001 Removal of the DMC (1WT1,1WT2,1WT3)
AMM 31-63-34-400-001 Installation of the DMC (1WT1,1WT2,1WT3)
AMM 34-36-00-740-002 BITE Test of the ILS
AMM 34-36-00-740-003 BITE Test of the MMR
AMM 34-36-31-000-001 Removal of the ILS Receiver (2RT1,2RT2)
AMM 34-36-31-000-002 Removal of the Multi Mode Receiver (40RT1, 40RT2)
AMM 34-36-31-400-001 Installation of the ILS Receiver (2RT1,2RT2)
AMM 34-36-31-400-002 Installation of the Multi Mode Receiver (40RT1,
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 導航 NAVIGATION 2(120)
