R R R  - If necessary, install the safety guard on the body. - Insert the body in the mounting sleeve (TOP mark-up). - Insert the guiding tool OUT75. - TORQUE the screws to between 0.012 m.daN (1.0619 lbf.in) and 0.014 m.daN (1.2389 lbf.in) with the dynamometric screwdriver to extend the cams. 
R
 - Remove the guiding tool. - Install the head. 
R R R R R R R R R  (c) For ABS0951 ECE and KORRY pushbutton switch (Ref. Fig. 021) - Release the head with the tool OUT74 or equivalent. - If necessary, install the safety guard on the body. - Insert the body in the mounting sleeve (TOP mark-up). - Insert the guiding tool OUT217 (ECE) or 29085-001 (KORRY) - TORQUE the screws to between 0.0085 m.daN (0.7522 lbf.in) and 0.010 m.daN (0.8849 lbf.in) with the dynamometric screwdriver to extend the cams. 
R R  - Remove the guiding tool. - Install the head. 
R  (4) Install the head (E0418) 
R  (a) For E0415 MSC EATON pushbutton switch - Make sure that the lamps are installed. - Install the head in the body.
 ____NOTE : If the head has a teflon seal (Post date code 95-01), do not apply grease. 
R  (b) For E0415 ECE pushbutton switch - Make sure that the lamps are installed. - Put the head and retainer assembly in position with the TOP mark up. - Tilt the head and the retainer assembly. Insert the assembly into the body until the guide pin of the retainer engages in the slot on one side. Then engage the other guide pin in the slot on the other side.
 - Push the head into the body.
R  ________________5. Connection Table (Ref. Fig. 023)

R Illuminated Pushbutton Switch - Connection Table R Figure 023

20-45-11 Page 4420-45-12 Page 120-45-12 Page 2

 _____________________________________________ANNUNCIATOR LIGHT - DESCRIPTION AND OPERATION
 _______1. General
 Annunciator lights installed on aircraft have the codes that follow: 
R 
R  A. Round annunciator lights: 
R  - E0070 (ex NSA933610) 
R  - E0071 (ex NSA933613) 
R  - E0123 (ex NSA931919) 
R  - E0216 (ex NSA931920) 
R  - E0307 
R  - E0423 
R  E0457 
R  - E0595 
R  - NSA931914 
R  - NSA931925 
R  - NSA933611 
R  B. Square annunciator lights: 
R  - NSA933401 
R  - NSA933402 
R  - NSA933403 with NSA933404 mounting 
R  C. Rectangular annunciator lights: 
R  - E0278 
R  - NSA933632 to NSA933637 (ex NSA933622 to NSA933627) 
R  - NSA933643 to NSA933645 (ex NSA933602 to NSA933604) 
R  - NSA933646 and NSA933647 (ex NSA933605 and NSA933606) 
R  - NSA933648 (ex NSA933607) 
R  - NSA933608 and NSA933609 
R  - NSA933620 
R  - NSA933621 
R  - NSA933628 and NSA933629

R
R  ________________________2. Round Annunciator Lights 
R  A. E0070 (ex NSA933610) 
R  (Ref. Fig. 001)
 (1) P/N identification 
R  E0070 B 0B 03T 
R  NSA933610 - 1 - 0B - 03T | 
R  | | | | | 
R  | | | | -------------- Lamp code: 
R  | | | | without = 28 V-1, 12W - Type 327 
R  | | | | S = light supplied without lamp 
R  | | | ------------------ Lens color code 
R  | | ----------------------- Lens type code 
R  | ---------------------------- Connection arrangement code 
R  ------------------------------------- Standard P/N
 (2) P/N characteristics 
R  (a) Connection arrangement 
R  (Ref. Fig. 001) 
R  (3) Connection procedure 
R  For connection procedure (Ref. Connection Table paragraph). 
R  B. E0071 (ex NSA933613) 
R  (Ref. Fig. 002)
 (1) P/N identification 
R  E0071 A 8 - 9 - 83 D 
R  NSA933613 | - 8 - 9 - 01 - 4 
R  | | | | | | 
R  | | | | | ---------- Inscription orientation code 
R  | | | | -------------- START inscription code 
R  | | | ------------------- Lens color code 
R  | | ----------------------- Lens type code 
R  | --------------------------- Type of indicator housing 
R  ----------------------------------- Standard P/N
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 ESPM Electrical Standard Practices Manual 3(70)