20-44-23 Page 8

R Type MIL-C-24308 Connectors - Connector Assembly E0237 - E0362 Figure 006

20-44-23 Page 9

R NSA938421 Coupling screw

20-44-23 Page 10

 _____________________________4. Size 22 Rectangular Connector
 A. E0362 Connector
 (1) P/N identification
 E0362  E 44 P 03 A | | | | | | | | | | | ---- Variant code | A = without contact | | | | | | B = with contact | | | | | | | | | -------- Version code | 01 : without grommet | | | | | 02 : with grommet | | | | | 03 : with grommet and | | | | | interfacial seals | | | | | | | ------------- Type of contact | P : pin (male contact) | | | | S : socket (female contact) | | | | | ----------------- Shell size and contact arrangement code | | | ---------------------- Installation code | E : rigid attachment | | F : floating attachment | | (front mounting) | | R : floating attachment | | (rear mounting) | ---------------------------- Standard P/N
 (2)
 P/N characteristics

 (a)
 Temperature Minimum operating temperature is -55 deg.C (-67.00 deg.F) Maximum operating temperature is +125 deg.C (+257.00 deg.F)

 (b)
 Contact arrangement code
 (Ref. Fig. 007)

 (3)
 Associated items

 (Ref. Fig. 006) R ABS0608 and E0306 Sliding lock retainers R NSA938421-02(-04) Coupling screw R NSA938422, E0365 and E0448 Backshells for rectangular connectors R (assembly by screws)

20-44-23 Page 11

 Type MIL-C-24308 Connectors - Contact Arrangements
 E0362 and NSA938361
 Figure 007

20-44-23 Page 12
 Apr 01/02
R

 B. NSA938361 Connector
R R R R R R  (1) P/N identification NSA938361 -01 A | | | | | ----- Delivery code | no code = without contact | | | and grommet seal | | | A = without contact and | | | with grommet seal | | | A1 = with contact and | | | with grommet seal | | | B = with contact and | | | without grommet seal | | | ------------- Type and installation code | ------------------------ Standard P/N
 (2) P/N characteristics
 (a) Temperature Minimum operating temperature is -55 deg.C (-67.00 deg.F) Maximum operating temperature is +125 deg.C (+257.00 deg.F)
 (b) Contact Arrangement code (Ref. Fig. 007) 
R  (c) Type and installation code

20-44-23 Page 13

R -------------------------------------------------------------------------------R | | TYPE AND INSTALLATION | CONTACT | R | CODE |-------------------------------------------| ARRANGEMENT | R | | PLUG | RECEPTACLE | CODE | R |--------------------------------|---------------------|----------------------| R | 01 | RIGID | -| | R |----------|---------------------|---------------------| | R | 02 | -| RIGID | 15 | R |----------|---------------------|---------------------| | R | 03 | FLOATING | -| | R |----------|---------------------|---------------------|----------------------| R | 04 | FLOATING | -| | R |----------|---------------------|---------------------| | R | 05 | -| RIGID | 44 | R |----------|---------------------|---------------------| | R | 06 | RIGID | -| | R |----------|---------------------|---------------------|----------------------| R | 07 | RIGID | -| | R |----------|---------------------|---------------------| 78 | R | 08 | -| RIGID | | R |-----------------------------------------------------------------------------| R | 12 | -| RIGID | 62 | R |-----------------------------------------------------------------------------|
R (3) Specific procedure R (Ref. Fig. 008) R Resistor (E0072, E0593 or E0594) and diode (NSA934112) connection on R NSA938361-05 connector by crimping socket contacts E0396DV2200 (or R equivalent) is permitted.
R (a) First, carefully and symmetrically bend the element leads using R round-nose pliers positioned against the diode, so that they are R aligned with the terminals to be connected.
R (b) Insulation R Insulate each lead of the resistor or of the diode with a R heat-shrink sleeve NSA937212A20. Leave on part of the lead R uncovered to permit crimping of the contact.
R (c) Identification R Resistors or diode must be identified with an identification R sleeve NSA937201 (as short as possible) placed on one of the R element leads. Make sure that the sleeve does not prevent heat R dissipation.

20-44-23 Page 14

R Type MIL-C-24308 Connectors - Resistors and Diodes Connection R NSA938361 R Figure 008

20-44-23 Page 1520-44-23 Page 16

R  (d) Connection 
R  Use socket contacts E0396DV2200 (or equivalent) crimped on each 
R  lead of the element (ref. connection table). 
R  (e) Installation 
R  After insulation sleeve installation and contact crimping, 
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 ESPM Electrical Standard Practices Manual 3(43)