-
For E0460-03 only : . Install the insulating washer against the cap. . Install the contact on the wire core against the insulating washer. Crimp with the applicable tool. . Install the assembly in the connector body. . Tighten the cap at the applicable torque. Make a red line on the connector body and the cap to show that it is tight. . Install the second heat-shrinkable sleeve on the cap, on the body. Shrink the sleeve to let the red line stay apparent.
R D. Associated items R - Coaxial adapter NSA938602
R (1) P/N identification R (Ref. Fig. 006)
20-44-31 Page 4
R BNC Type Coaxial Connectors - Crimping Tools E0460 Figure 003
20-44-31 Page 5
R BNC Type Coaxial Connector - Crimping Procedure R E0460 R Figure 004
20-44-31 Page 6
R BNC Type Coaxial Connectors - Crimping Procedure E0460 Figure 005
20-44-31 Page 7
BNC Type Coaxial Connectors - Associated Items for NSA938601 NSA938602 and NSA938606 R Figure 006
20-44-31 Page 820-44-31 Page 920-44-31 Page 10
R NSA938602 - 01
R | |
R | --------------- Item code No
R |
R ----------------------- Standard P/N
R (2) P/N Characteristics
R (a) Temperature
R Minimum operating temperature is -55 deg.C (-67.00 deg.F).
R Maximum operating temperature is 165 deg.C (329.00 deg.F).
_________3. NSA938601
R A. P/N identification (Ref. Fig. 007) NSA938601 F 01 | | | | | ---------- Wire type code | | | --------------- Type code | F : Right receptacle | | P : Right plug | | TC : Square flange bulkhead connector | | TR : Round flange bulkhead connector | | FC : Right angle plug | ----------------------- Standard P/N
B. P/N Characteristics
(1) Temperature Minimum operating temperature is -65 deg.C (-85.00 deg.F). Maximum operating temperature is 165 deg.C (329.00 deg.F).
C. Connection procedure
R (1) Wire stripping (Ref. Fig. 008)
(a) Put the heat shrinkable sleeve if necessary (for F05 or TC06 only) then the ferrule on the wire before you strip it, to prevent the deformation of the shield braid.
(b) Strip the wire. Make sure that you do not cut the shield braid strands or cause damage to the wire core.
R (2) Crimping procedure (Ref. Fig. 008, 009)
D. Associated items : - Coaxial adapters NSA938602 and NSA938606
R (1) P/N identification : (Ref. Fig. 006) NSA938602 01 | | | ---------- Item code No ------------------ Standard P/N
BNC Type Coaxial Connectors - Layout NSA938601 R Figure 007
20-44-31 Page 11
BNC Type Coaxial Connectors - Stripping and Crimping Tools NSA938601 R Figure 008
20-44-31 Page 12
BNC Type Coaxial Connectors - Crimping Procedure NSA938601 R Figure 009
20-44-31 Page 13
NSA938606 01
| |
| ---------- Item code No
------------------ Standard P/N
(2) P/N characteristics
(a)
Temperature for NSA938602-01 Minimum operating temperature is -55 deg.C (-67.00 deg.F). Maximum operating temperature is 165 deg.C (329.00 deg.F).
(b)
Temperature for NSA938606-01 Minimum operating temperature is -65 deg.C (-85.00 deg.F). Maximum operating temperature is 165 deg.C (329.00 deg.F).
20-44-31 Page 14
Oct 01/04
R _________4. NSA938603
A. P/N identification
(Ref. Fig. 010)
NSA938603 F 02 | | | | | ------- Wire type code | | | ------------ Type code | F : Right receptacle | | TC : Square flange bulkhead connector | -------------------- Standard P/N
B. Connection procedure
(1) Wire stripping
(Ref. Fig. 011)
R (a) Strip the cable to the size "A". Make sure that you do not cut R the shield braid strand or cause damage to the wire core.
(2) Crimping procedure
(Ref. Fig. 012)
-Install in this order the cap, the washer and the seal on the wire.
-Open and comb the braid along the wire core.
-Install the braid support on the wire.
-Turn the braid above the braid support cone and cut it on the flange level.
-Strip the wire to agree with size "B" and "C".
-Solder the contact on the wire core.
-
Install this assembly in the body.
-
Install the seal and the washer.
-
Install the cap, tighten to applicable torque.
20-44-31 Page 15
BNC Type Coaxial Connectors - Layout
NSA938603
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 ESPM Electrical Standard Practices Manual 3(49)
