曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

D. In this procedure the speed brake refused takeoff (RTO) switch is referred to as the "RTO switch".
TASK 27-62-32-000-801
2. Speed Brake Refused Takeoff (RTO) Switch Removal
(Figure 401)
A. Location Zones
Zone Area
211 Flight Compartment - Left
B. Prepare for the Removal
SUBTASK 27-62-32-860-001
(1) Open this circuit breaker and install safety tag:
F/O Electrical System Panel, P6-2
Row Col Number Name
B 9 C00440 FLIGHT CONTROL AUTO SPEED BRAKE
C. RTO Switch Removal
SUBTASK 27-62-32-020-001
(1) Remove screws [1] and washers [2] and the cover plate [3] on the control stand to get access to
the RTO switch [13].
(a) Remove the screw [9] and screw [10] that attach the RTO switch [13] to the structure.
SUBTASK 27-62-32-020-002
(2) Remove the screws [6] and washers [7] to disconnect the electrical wires [8] from the RTO
switch [13].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-32
Page 401
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Speed Brake Refused Takeoff (RTO) Switch Installation
Figure 401 (Sheet 1 of 3)/27-62-32-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-32
Page 402
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Speed Brake Refused Takeoff (RTO) Switch Installation
Figure 401 (Sheet 2 of 3)/27-62-32-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-32
Page 403
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Speed Brake Refused Takeoff (RTO) Switch Installation
Figure 401 (Sheet 3 of 3)/27-62-32-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-32
Page 404
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-62-32-400-801
3. Speed Brake Refused Takeoff (RTO) Switch Installation
(Figure 401)
A. References
Reference Title
27-62-00-820-809 Speed Brake RTO Test (P/B 501)
B. Expendables/Parts
AMM Item Description AIPC Reference AIPC Effectivity
13 Switch 27-62-32-01-035 GUN 001-028, 101-121,
155-157, 201-999
C. Location Zones
Zone Area
211 Flight Compartment - Left
D. RTO Switch Installation
SUBTASK 27-62-32-420-001
(1) Install the RTO switch [13]:
(a) Put the RTO switch [13] in its position on the structure.
(b) Connect the electrical wires [8] to the RTO switch [13].
(c) Install the screw [9] and screw [10] that attach the RTO switch [13].
SUBTASK 27-62-32-860-002
(2) Remove the safety tag and close this circuit breaker:
F/O Electrical System Panel, P6-2
Row Col Number Name
B 9 C00440 FLIGHT CONTROL AUTO SPEED BRAKE
SUBTASK 27-62-32-820-002
(3) Do this task: Speed Brake Refused Takeoff (RTO) Switch Adjustment, TASK 27-62-32-400-802.
SUBTASK 27-62-32-700-001
(4) Do this task: Speed Brake RTO Test, TASK 27-62-00-820-809.
------------------------- END OF TASK ---------------------------
TASK 27-62-32-400-802
4. Speed Brake Refused Takeoff (RTO) Switch Adjustment
(Figure 401)
A. Location Zones
Zone Area
211 Flight Compartment - Left
B. RTO Switch Adjustment
SUBTASK 27-62-32-820-003
(1) Adjust the RTO switch [13]:
(a) Make sure the thrust levers are at idle and the reverse thrust levers are down and stowed.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-32
Page 405
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(b) Make sure the speed brake lever is in the DOWN position.
(c) Disconnect the electrical wires [8] from the RTO switch [13].
(d) Loosen screw [9] and screw [10].
(e) Turn the RTO switch [13] as far aft as possible.
(f) Make sure there is no continuity between pin 8 and 9 of the D5148J connector.
(g) Move the left reverse thrust lever aft until there is a 0.0400 to 0.0600 inch (1.0160 to 1.5240
millimeters) clearance between the speed brake lever dog [4] and the detent plate
assembly lip [5].
(h) Turn the RTO switch [13] until the roller [11] touches the actuator arm [12] and there is
continuity between pins 8 and 9 of the D5148J connector.
(i) Tighten the screw [9] and screw [10].
(j) Slowly move the left thrust lever back to the down and stowed position.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊7 AIRCRAFT MAINTENANCE MANUA(7)