曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(WARNING PRECEDES)
(7) Install the lockout set, SPL-1734 on the actuators of the adjacent leading edge flaps and slats. To
do this, do this task: Leading Edge Flap and Slat Locks Installation, TASK 27-81-00-480-801.
SUBTASK 27-88-11-220-002
(8) With the slat in the 1-unit detend position, make sure the gap between the inboard proximity
sensor [4] and the target [9] is 0.115-0.135 inch (2.92-3.43 millimeters).
(a) If the gap is out of tolerance, adjust the gap between the proximity sensor [4] and the target
[9].
1) Remove the bolts [5] or [6], washers [7], shim [3], spacer [1] or [2] and nuts [8].
2) Add or remove shim [3] as it is necessary to get the correct gap between the proximity
sensor [4] and the target [9].
3) Install the bolts [5] or [6], washers [7], spacer [1] or [2], and nuts [8].
(b) Bond shims [3] and spacer [1] or [2] to the bracket with adhesive, A00165.
SUBTASK 27-88-11-080-004
WARNING: REMOVE THE LOCK FROM LEADING EDGE FLAP ACTUATOR CAREFULLY TO
PREVENT ACCIDENTAL OPERATION OF THE LEADING EDGE FLAPS. THE LEADING
EDGE FLAPS CAN MOVE QUICKLY. THIS CAN CAUSE INJURIES TO PERSONNEL,
AND DAMAGE TO EQUIPMENT.
(9) Remove the lockout set, SPL-1734 from the actuators of the leading edge flap and slats. To do
this, do this task: Leading Edge Flap and Slat Locks Removal, TASK 27-81-00-080-801.
SUBTASK 27-88-11-860-008
WARNING: MAKE SURE PERSONS AND EQUIPMENT ARE CLEAR OF THE LEADING EDGE FLAPS
AND SLATS AND THE TRAILING EDGE FLAPS. THE LEADING EDGE FLAPS AND
SLATS AND THE TRAILING EDGE FLAPS CAN MOVE QUICKLY. THIS CAN CAUSE
INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(10) Retract the leading edge slats to the UP position with primary control. To do this, do this task:
Leading Edge Flaps and Slats Retraction, TASK 27-81-00-860-804.
SUBTASK 27-88-11-480-003
WARNING: MAKE SURE TO INSTALL THE LEADING EDGE FLAP AND SLAT ACTUATORS
LOCKOUT SET TO PREVENT ACCIDENTAL OPERATION OF THE LEADING EDGE
FLAPS AND SLATS. THE LEADING EDGE FLAPS AND SLATS CAN MOVE QUICKLY.
THIS CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(11) Install the lockout set, SPL-1734 on the actuators of the adjacent leading edge flaps and slats. To
do this, do this task: Leading Edge Flap and Slat Locks Installation, TASK 27-81-00-480-801.
SUBTASK 27-88-11-220-003
(12) On leading edge slat 1 or 8, make sure the gap between the (inboard or outboard) proximity
sensor [4] and the target [14] is 0.115-0.135 inch (2.92-3.43 millimeters).
(a) If the gap is out of tolerance, adjust the gap between the proximity sensor [4] and the target
[14].
1) Remove the nuts [12], washers [11], shim [13], and bolts [10] to remove the target [14].
2) Add or remove shim [13] as it is necessary to get the correct gap between the proximity
sensor [4] and the target [14].
3) Install the bolts [10], target [14], washers [11] and nuts [12].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-88-11
Page 414
Feb 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-88-11-080-001
WARNING: CAREFULLY REMOVE THE LEADING EDGE FLAP ACTUATOR LOCK TO PREVENT
ACCIDENTAL OPERATION OF THE LEADINGE EDGE FLAPS. THE LEADING EDGE
FLAPS CAN MOVE QUICKLY. THIS CAN CAUSE INJURY TO PERSONS AND DAMAGE
TO EQUIPMENT.
(13) Remove the lockout set, SPL-1734 from the actuators of the leading edge flap and slats. To do
this, do this task: Leading Edge Flap and Slat Locks Removal, TASK 27-81-00-080-801.
SUBTASK 27-88-11-710-001
(14) Do this task: Leading Edge Flap and Slat Proximity Sensor Test, TASK 27-88-11-700-801.
G. Put the Airplane Back to Its Usual Condition
SUBTASK 27-88-11-940-001
(1) Install the applicable access panels:
(a) For the left wing, close these access panels:
Number Name/Location
521CB Lower Leading Edge Access Panel - Slat Station
53.95
521DB Lower Leading Edge Access Panel - Slat Station
71.38
521FB Lower Leading Edge Access Panel - Slat Station
116.32
521JB Lower Leading Edge Access Panel - Slat Station
170.20
521KB Lower Leading Edge Access Panel - Slat Station
188.12
521LB Lower Leading Edge Access Panel - Slat Station
216.76
521MB Lower Leading Edge Access Panel - Slat Station
234.65
521QB Lower Leading Edge Access Panel - Slat Station
289.17
521RB Lower Leading Edge Access Panel - Slat Station
307.75
521SB Lower Leading Edge Access Panel - Slat Station
337.62
521TB Lower Leading Edge Access Panel - Slat Station
356.14
521WB Lower Leading Edge Access Panel - Slat Station
415.79
521XB Lower Leading Edge Access Panel - Slat Station
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊7 AIRCRAFT MAINTENANCE MANUA(111)